Determine Cabinet Type

Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!

Caution: When selecting a location for your coffeemaker, make sure you have adequate room to reach the receptacle.

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A- Plug™ outlet, make sure you can easily unplug the appliance after each use.

Prior to installation, determine if your cabinet has a flat bottom (B) or an overhanging molding (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has an overhang molding, refer to OVERHANG MOLDING INSTALLATION.

B		C

STANDARD INSTALLATION (FLAT CABINET)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

1.Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.

2.Clean both the underside and topside of the bottom panel of the cabinet.

3.With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D).

Important: Do not align screw holes on template directly under the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.

4.Fold the template along the edge of your cabinet so the thick line is straight with bottom front edge; pull template tight and tape down to hold in place.

5.Drilling from under the cabinet up, drill holes through the 4 places marked on the template, using a ¼-inch drill bit (E).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

6.Once holes are drilled, remove tape and mounting template.

7.Wipe dust and debris off the topside and underside of the cabinet surface.

8.Place a washer inside the cabinet over each of the 4 holes you drilled.

Important: Top panel of coffeemaker is removable to make installation easier. Simply grip the panel at the rear and pull back to remove (Fa) or insert a flathead screwdriver at the front of the panel by one of the mounting holes and twist to pop open (Fb). Once removed, mount panel in place following the directions below and then slide coffeemaker back on the panel track to reattach appliance once the panel has been mounted.

Fa		Fb

9.Hold panel in place; drilled holes on cabinet should be aligned with mounting holes on the panel.

10.From inside of the cabinet down into panel holes, drop 4 screws in place. Place a nut on each screw and tighten.

Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut.

Note: Always tighten nuts to ensure the appliance does not move or shake during operation.

SDC740B, SDC750, SDC740 specifications

Black & Decker has long been recognized for its commitment to quality and innovation in power tools and home improvement equipment. Among its impressive lineup, the Black & Decker SDC740, SDC750, and SDC740B stand out for their user-friendly features, robust design, and advanced technology, making them ideal for DIY enthusiasts and professionals alike.

The Black & Decker SDC740 is a standout in the cordless drill category, boasting a lightweight and compact design that enhances maneuverability. With a powerful 20V max lithium-ion battery, it provides sustained performance for various tasks. This model features a 1/2-inch keyless chuck, enabling quick and easy bit changes, while the 24-position clutch allows for precise torque adjustment, helping to prevent overdriving screws. The built-in LED work light ensures visibility in dimly lit areas, making it perfect for tight spaces.

Moving on to the SDC750, this model offers additional features that elevate its functionality. Equipped with the same robust 20V max lithium-ion battery, it delivers ample power for both drilling and driving applications. The SDC750 has an advanced 2-speed transmission, giving users the ability to switch between high speed for quickly drilling holes and low speed for more controlled driving. Additionally, it comes with a soft-grip handle that enhances comfort during prolonged use, reducing user fatigue.

The SDC740B variant is the brushless version of the SDC740, which means it offers greater efficiency and a longer lifespan. Brushless motors generate less friction, leading to increased runtime and reduced maintenance requirements. Like its counterparts, the SDC740B features a keyless chuck for easy bit changes and provides excellent torque control through its adjustable clutch settings.

All three models emphasize convenience and ease of use, with ergonomic designs that cater to the comfort of the user. Their versatility allows them to tackle a variety of applications, from assembling furniture to hanging shelves. The inclusion of built-in LED lights ensures that users can operate effectively in various lighting conditions, enhancing their experience and productivity.

In summary, the Black & Decker SDC740, SDC750, and SDC740B combine impressive power, innovative features, and user-centric design. They are perfect options for anyone looking to invest in reliable and efficient cordless drills that can handle a wide range of tasks around the home or job site.