Overhang Molding Installation

11.Once the panel is secure, reattach coffeemaker to panel by lifting appliance up, aligning it with the track on the panel and then sliding it back into place.

12.Plug into standard electrical outlet. Extra cord can be hung over cord management hook behind unit (G).

Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-Plug™ outlet, make sure you can easily unplug the appliance after each use.

13.Your †SpaceMaker™ appliance is now ready for use!

For cabinets with an overhang molding (see Illustration C)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

Note: Spacers are provided in case your cabinet has an overhang molding at the front edge. Only use spacers on the rear screws of the appliance to ensure it is level with the front.

1.Clear countertop under installation area to avoid getting on other appliances or items. Open cabinets and remove contents to make mounting easier.

2.Clean both the underside and topside of the bottom panel of the cabinet.

3.Using a ruler, measure the thickness of the overhang molding (H), accurately noting the number for use in the following step.

Note: If you do not have a ruler, you may use the paper ruler provided on the edge of your mounting template.

4.After measuring the overhang molding thickness as shown in Illustration H, look at the dashed lines on the mounting template; each line has a measurement next to it that indicates the thickness of the overhang molding used with that line. For example, if your cabinet has an overhang molding thickness of ½”, you will use the ½” dashed line on the template.

5.Fold the template along the dashed line that matches the thickness of your overhang molding.

6.Place the folded template against the back edge of the overhang molding, making sure the side with the drill hole marks is facing down (J).

Important: Do not align screw holes on template directly under the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.

7.Making sure to keep the fold line straight against the back edge of the overhang molding, tape the template securely in place.

8.Drilling from under the cabinet up, drill holes through the 4 places marked on the template using a ¼-inch drill bit (K).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

9.Once holes are drilled, remove tape and mounting template.

10. Wipe dust and debris off underside and topside of cabinet surface.

SDC740B, SDC750, SDC740 specifications

Black & Decker has long been recognized for its commitment to quality and innovation in power tools and home improvement equipment. Among its impressive lineup, the Black & Decker SDC740, SDC750, and SDC740B stand out for their user-friendly features, robust design, and advanced technology, making them ideal for DIY enthusiasts and professionals alike.

The Black & Decker SDC740 is a standout in the cordless drill category, boasting a lightweight and compact design that enhances maneuverability. With a powerful 20V max lithium-ion battery, it provides sustained performance for various tasks. This model features a 1/2-inch keyless chuck, enabling quick and easy bit changes, while the 24-position clutch allows for precise torque adjustment, helping to prevent overdriving screws. The built-in LED work light ensures visibility in dimly lit areas, making it perfect for tight spaces.

Moving on to the SDC750, this model offers additional features that elevate its functionality. Equipped with the same robust 20V max lithium-ion battery, it delivers ample power for both drilling and driving applications. The SDC750 has an advanced 2-speed transmission, giving users the ability to switch between high speed for quickly drilling holes and low speed for more controlled driving. Additionally, it comes with a soft-grip handle that enhances comfort during prolonged use, reducing user fatigue.

The SDC740B variant is the brushless version of the SDC740, which means it offers greater efficiency and a longer lifespan. Brushless motors generate less friction, leading to increased runtime and reduced maintenance requirements. Like its counterparts, the SDC740B features a keyless chuck for easy bit changes and provides excellent torque control through its adjustable clutch settings.

All three models emphasize convenience and ease of use, with ergonomic designs that cater to the comfort of the user. Their versatility allows them to tackle a variety of applications, from assembling furniture to hanging shelves. The inclusion of built-in LED lights ensures that users can operate effectively in various lighting conditions, enhancing their experience and productivity.

In summary, the Black & Decker SDC740, SDC750, and SDC740B combine impressive power, innovative features, and user-centric design. They are perfect options for anyone looking to invest in reliable and efficient cordless drills that can handle a wide range of tasks around the home or job site.