Determine Cabinet Type

Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect smaller †SpaceMaker™ appliances such as the mini food processor / grinder or can opener. Do not use this outlet for any other appliance!

Caution: When selecting a location for your coffeemaker, make sure you have adequate room to reach the receptacle.

Note: If you are connecting another †SpaceMaker™ appliance into the Save-A- Plug™ outlet, make sure you can easily unplug the appliance after each use.

Prior to installation, determine if your cabinet has a flat bottom (B) or an overhanging molding (C). If your cabinet is flat, follow STANDARD INSTALLATION; if the cabinet has an overhang molding, refer to OVERHANG MOLDING INSTALLATION.

STANDARD INSTALLATION (FLAT CABINET)

Important: Always wear protective glasses or goggles to prevent injury when drilling.

1.Clear countertop under installation area to avoid getting dust or debris on other appliances or items. Open cabinets and remove contents to make mounting easier.

2.Clean both the underside and topside of the bottom panel of the cabinet.

3.With cabinet doors open, place mounting template flush against the surface of the underside of your cabinet, making sure to align thick line on template with bottom front edge of your cabinet (D).

Important: Do not align screw holes on template directly under the partition between cabinets, as this will prevent you from installing the appliance properly. Pay close attention to where the drill holes will be set so as not to damage your cabinets during mounting. Drilling through your cabinet’s partition may cause damage to cabinets and prevent proper installation.

4.Fold the template along the edge of your cabinet so the thick line is straight with bottom front edge; pull template tight and tape down to hold in place.

5.Drilling from under the cabinet up, drill holes through the 4 places marked on the template, using a ¼-inch drill bit (E).

Important: Always ensure you are drilling straight up through the marked mounting hole on the template. Drilling at an angle may prevent proper installation and may damage cabinets if the drill bit pierces the partition.

6.Once holes are drilled, remove tape and mounting template.

7.Wipe dust and debris off the topside and underside of the cabinet surface.

8.Place a washer inside the cabinet over each of the 4 holes you drilled.

Important: Top panel of coffeemaker is removable to make installation easier. Simply grip the panel at the rear and pull back to remove (Fa) or insert a flathead screwdriver at the front of the panel by one of the mounting holes and twist to pop open (Fb). Once removed, mount panel in place following the directions below and then slide coffeemaker back on the panel track to reattach appliance once the panel has been mounted.

Fa		Fb

9.Hold panel in place; drilled holes on cabinet should be aligned with mounting holes on the panel.

10.From inside of the cabinet down into panel holes, drop 4 screws in place. Place a nut on each screw and tighten.

Note: To determine which screws to use, you must have enough of the screw exposed underneath the cabinet to properly thread the screw into the nut.

Note: Always tighten nuts to ensure the appliance does not move or shake during operation.

SDC850, SDC850Q specifications

The Black & Decker SDC850Q and SDC850 are innovative and versatile tools designed for demanding users who require reliability and performance in various applications. These models are particularly well-suited for both professionals and DIY enthusiasts looking for efficient ways to complete tasks around the home or job site.

The SDC850Q is an advanced cordless screwdriver that boasts a powerful 8V lithium-ion battery, offering a balance between high performance and portability. Its quick-charge technology ensures that the battery is ready to go in just a few hours, allowing users to minimize downtime and maintain productivity. The tool features an impressive runtime, enabling users to handle multiple tasks without the need for constant recharging.

One of the standout features of the SDC850Q is its compact and lightweight design, making it easy to navigate tight spaces and overhead applications. The ergonomic handle provides a comfortable grip, reducing fatigue during prolonged use, which is particularly advantageous for professionals who spend significant amounts of time working on projects.

Both the SDC850Q and SDC850 models come equipped with a 3-position switch that allows for quick adjustments between different driving tasks, enhancing their versatility. The built-in LED work light illuminates dark areas, ensuring that users can see their work clearly, even in dimly lit spaces. This is particularly useful for applications such as assembling furniture, installing cabinets, or working in garages.

Safety is a key consideration in the design of these Black & Decker models. The enhanced overload protection helps prevent damage to the motor and prolongs the life of the tool, providing peace of mind for users who rely on their equipment daily. Furthermore, the inclusion of a magnetic bit holder allows for easy bit switches and helps keep bits secure during use.

In terms of additional technologies, the SDC850Q features a powerful motor that delivers sufficient torque for a wide range of fastening applications, from light tasks to more robust assembly jobs. Both models also include a variety of accessories, such as multiple bits and a carrying case, making them even more user-friendly and applicable for various projects.

Overall, the Black & Decker SDC850Q and SDC850 stand out in their category thanks to their combination of portability, power, and practicality. These tools not only enhance efficiency but also cater to the needs of users who demand high-quality performance in their daily tasks. Whether you are a seasoned professional or a weekend warrior, these cordless screwdrivers are built to deliver reliable results and simplify your projects.