Installation Instructions, Prepare Location

Electrical Requirements

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

IMPORTANT: The hood must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition, or Canadian Electrical Code, CSA C22.1.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park, Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

■A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this hood be provided.

■Do not ground to a gas pipe.

■Check with a qualified electrician if you are not sure range hood is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

■The range hood must be connected with copper wire only.

■The range hood should be connected directly to the fused disconnect (or circuit breaker) box through flexible armored cable or flexible metallic conduit.

■Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70, latest edition, or CSA Standard C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91, latest edition, and all local codes and ordinances.

INSTALLATION INSTRUCTIONS

Prepare Location

■Do not cut a joist or stud unless absolutely necessary. If a joist or stud must be cut, then a supporting frame must be constructed.

■Before making cutouts, make sure there is proper clearance within the ceiling or wall for exhaust vent.

■Hood installation height above cooktop is the user's preference. The lower the hood above the cooktop, the more efficient the capturing of cooking odors, grease and smoke.

■Check your ceiling height and the hood height maximum before you select your hood.

WARNING

Excessive Weight Hazard

Use two or more people to move and install range. Failure to do so can result in back or other injury.

2.Select a flat surface for assembling the unit. Cover that surface with a protective covering.

3.Determine and mark the centerline on the wall where the canopy hood will be installed.

4.Select a mounting height, minimum 30" (76.2 cm), above the cooking surface and mark reference line on the wall.

5.Tape template in place, aligning the template centerline and bottom of template with hood bottom line and with the centerline marked on the wall.

1.If possible, disconnect and move freestanding or slide-in range from cabinet opening to provide easier access to rear wall. Otherwise put a thick, protective covering over countertop, cooktop or range to protect from damage or dirt.

A.Centerline

B.Lower support bracket

C.Mounting height reference

D.Fastener locations

19760268A specifications

The Whirlpool 19760268A is a refrigerator that seamlessly blends style, functionality, and advanced technology to meet the needs of modern households. With its sleek design and impressive capacity, this appliance stands out as a reliable addition to any kitchen.

One of the notable features of the Whirlpool 19760268A is its spacious interior. The refrigerator offers ample storage space to accommodate groceries, beverages, and meal prep items. Its adjustable shelving allows users to customize the layout according to their needs, making it easy to store tall bottles or bulky containers. Additionally, the fridge compartment includes humidity-controlled crisper drawers that help keep fruits and vegetables fresh for longer periods.

This model is equipped with advanced cooling technology designed to maintain optimal temperatures. The Adaptive Defrost system intelligently detects the frost buildup and minimizes energy usage by only running the defrost cycle when necessary. This not only conserves energy but also ensures food remains at its freshest.

Another key feature is the exterior ice and water dispenser. This convenience allows for easy access to fresh water and ice cubes, reducing the need to open the refrigerator door, thereby maintaining a consistent internal temperature. The dispenser is equipped with a filtration system that enhances water quality by reducing contaminants, ensuring every sip is crisp and refreshing.

Energy efficiency is a critical aspect of the Whirlpool 19760268A. This refrigerator is ENERGY STAR certified, meaning it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification signifies that the appliance consumes less energy compared to traditional models, resulting in lower utility bills and a reduced environmental impact.

The Whirlpool 19760268A also features a vibrant LED lighting system that brightens every corner of the interior, making it easy to find items, even in the back of the shelves. Furthermore, its fingerprint-resistant finish keeps the exterior looking clean and modern, minimizing the appearance of smudges and streaks.

In summary, the Whirlpool 19760268A is a versatile and efficient refrigerator that combines space, advanced features, and user-friendly technology. From its adaptive cooling and quality water filtration system to its energy efficiency and customizable storage options, this model is designed to cater to the demands of today’s families, ensuring food stays fresh and easily accessible. With its thoughtful design and innovative technologies, it represents a smart investment for those seeking reliability and style in their kitchen.