Install Hood, Install Vent | Whirlpool 19760268A specification

6.Place the lower support bracket on the template aligning it with the traced rectangle. Mark centers of 3 fastener locations through the template to the wall.

IMPORTANT: All screws must be installed into wood. Remove the template.

7.Drill ⁷⁄₆₄" (2.75 mm) pilot holes at two upper locations where screws are being installed into wood.

8.Determine and make all necessary cuts in the wall for the vent system. Install the vent system before installing the hood. See “Venting Requirements” section.

9.Determine the required height for the ¹⁄₂" conduit and drill a 1¹⁄₄" (3.2 cm) hole at this location.

10.Run the ¹⁄₂" conduit through the hole. Run wire through the ¹⁄₂" conduit according to the National Electrical Code or CSA Standards and local codes and ordinances. There must be enough ¹⁄₂" conduit and wires from the fused disconnect (or circuit breaker) box to make the connection in the hood’s electrical terminal box.

11.Use caulk to seal all openings.

NOTE: Do not turn on power until installation is complete.

A.Lower support bracket

B.Centerline on wall

12.Attach the lower support bracket to the wall at location marked on the template.

Vent cover bracket assembly and installation

1.Assemble the 3 pieces of the vent cover bracket using 4 screws provided. The assembled bracket should be sized to fit inside the upper vent cover.

A. Vent cover bracket assembly

B. Upper vent cover

2.Install vent cover bracket to wall about ¹⁄₈" (3 mm) away from the ceiling with drywall anchors supplied.

A. Vent cover bracket

B. Centerline on wall

Install Hood

WARNING

Excessive Weight Hazard

Use two or more people to move and install range hood. Failure to do so can result in back or other injury.

1.Hang blower housing on the lower support bracket using the 2 mounting hooks on the rear of the blower housing.

A E

A. Lower support bracket

B. Mounting hooks

C Adjust side to side

D. Adjust up and down

E. Blower housing

2.Level the blower housing with leveling screws in mounting hooks, using a level across bottom of blower housing.

3.Remove the filter and secure the blower housing with one screw in the bottom hole located in the rear of the blower.

A. Rear of blower housing

B. Bottom screw hole

Install Vent

Vented installations only

1.Fit vent system over transition piece.

2.Seal connection with duct tape.

19760268A specifications

The Whirlpool 19760268A is a refrigerator that seamlessly blends style, functionality, and advanced technology to meet the needs of modern households. With its sleek design and impressive capacity, this appliance stands out as a reliable addition to any kitchen.

One of the notable features of the Whirlpool 19760268A is its spacious interior. The refrigerator offers ample storage space to accommodate groceries, beverages, and meal prep items. Its adjustable shelving allows users to customize the layout according to their needs, making it easy to store tall bottles or bulky containers. Additionally, the fridge compartment includes humidity-controlled crisper drawers that help keep fruits and vegetables fresh for longer periods.

This model is equipped with advanced cooling technology designed to maintain optimal temperatures. The Adaptive Defrost system intelligently detects the frost buildup and minimizes energy usage by only running the defrost cycle when necessary. This not only conserves energy but also ensures food remains at its freshest.

Another key feature is the exterior ice and water dispenser. This convenience allows for easy access to fresh water and ice cubes, reducing the need to open the refrigerator door, thereby maintaining a consistent internal temperature. The dispenser is equipped with a filtration system that enhances water quality by reducing contaminants, ensuring every sip is crisp and refreshing.

Energy efficiency is a critical aspect of the Whirlpool 19760268A. This refrigerator is ENERGY STAR certified, meaning it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification signifies that the appliance consumes less energy compared to traditional models, resulting in lower utility bills and a reduced environmental impact.

The Whirlpool 19760268A also features a vibrant LED lighting system that brightens every corner of the interior, making it easy to find items, even in the back of the shelves. Furthermore, its fingerprint-resistant finish keeps the exterior looking clean and modern, minimizing the appearance of smudges and streaks.

In summary, the Whirlpool 19760268A is a versatile and efficient refrigerator that combines space, advanced features, and user-friendly technology. From its adaptive cooling and quality water filtration system to its energy efficiency and customizable storage options, this model is designed to cater to the demands of today’s families, ensuring food stays fresh and easily accessible. With its thoughtful design and innovative technologies, it represents a smart investment for those seeking reliability and style in their kitchen.