GE JVM140K HOW to USE the MINUTE/SECOND Timer, How to Time a 3-Minute Phone Call

HOW TO USE THE MINUTE/SECOND TIMER

The Minute/Second Timer

The Minute/Second Timer has 3 timing functions:

•It operates as a minute timer.

•It call be set to delay cooking.

•It can be used as a hold setting after defrosting.

The Minute/Second Timer operates without

microwave energy.

Using a Holding Time

The Minute/Second Timer can also be used to

program a "holding time" between microwave

cooking functions. The time can range from 1 second to 99 minutes and 99 seconds. A holding or standing time may be found in some of your own recipes or in a cookbook.

How to Time a 3-Minute Phone Call

Step 1: Touch MIN/SEC TIMER pad.

Step 2: Touch number pad 3 and MINUTE pad (for 3 minutes and no seconds).

Step 3: Touch START. Display shows time counting down. The timer signals when time is up.

Programming Delayed Cooking

To delay cooking up to 99 minutes and 99 seconds, touch either TIME COOK I & II, TEMP COOK/ HOLD or AUTO ROAST and enter cook time, temperature or code. Touch MIN/SEC TIMER and enter number of minutes to delay cooking. When delaying Temp Cook/Hold or Auto Roast cooking, be sure probe is in food. Touch START. Timer will count down to O and cooking will begin.

How to Defrost, Hold and Time Cook

Let's say you want to defrost a frozen casserole for 15 minutes, hold for 10 minutes and then Time Cook for 25 minutes. Here's how to do it:

Step 1: Take casserole from freezer and place in oven.

	Step 2: Touch TIME
11ME	DEFROST pad.

DEFROST

Step 4: Set standing or hold

MINISEC time by touching MIN/SEC

TIMER TIMER pad.

Step 5: Touch 1,0 and MINUTE to hold for 10 minutes.

and MINUTE for 15 minutes

MIN UTE defrostingtime. (Defrosting

cooI

Step 6: Touch TIME COOK I &l 1 pad.

Step 3: Touch pads 1,5

is automatically set on power

level 3 but can be changed by touching the POWER LEVEL

pad and the desired power level.)

I I &ll

Step 7: Touch 2, 5 and MINUTE for 25 minutes of cooking time.

each function is automatically

START performed, oven display shows Step 8: Touch START. As instructions entered and the

function. When time is up,

the oven signals and flashes "End."

10