OPERATION
WARNING: THE EXHAUST HOOD AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE EXHAUST HOOD.
CONTROLS |
|
— Located on the left side behind the hood pull. Turns power to the | |
| exhaust hood on and off. When turned ON, the reset switch must be |
| pressed to start blowers. |
Green Interlock Light | — When lit, indicates that all hood interlock switches are closed and |
| power is applied to the fryer. |
Red ANSUL® Light | — When lit, indicates that the fire suppression system is not cocked and/ |
| or charged. |
Red FIP | — When lit, indicates that one or more filters are not properly installed. |
Sail Light | — When lit, indicates the exhaust blower is not operating and moving an |
| adequate volume of air. |
Reset Pushbutton Switch — Momentarily overrides the sail switch to allow the exhaust blower to start.
CLEANING
WARNING: DISCONNECT (UNPLUG) ELECTRIC POWER SUPPLY BEFORE CLEANING.
Clean the air filters and hood weekly (Fig. 5)
Charcoal Filter
Air Filter
Grease Filter
Tray
P L - 5 0 7 5 5
Fig. 5
1.Push in the bottom of the Grease Filter; tilt the top of the filter forward using the handles; and remove the filter. Scrub the Grease Filter in warm soapy water; rinse, drain and towel dry.
2.Push in the bottom of the Air Filter; tilt the top of the filter forward; and remove the filter. Scrub the Air Filter in warm soapy water; rinse, drain and towel dry.
– 7 –