Hobart HVH23 manual Troubleshooting, Unless ALL Three Filters are Properly Installed

Page 8

3.Push in the bottom of the Charcoal Filter; tilt the top of the filter forward using the handles; and remove the filter. When the Charcoal Filter needs to be cleaned, it is best to remove the charcoal from the filter. Remove the 4 screws from the filter frame, being careful not to spill the charcoal. Remove the frame end piece. Carefully pour the charcoal from the filter and save it for future re- use, if possible. Replace the frame end piece and 4 screws. Scrub the empty Filter Frame in warm soapy water; rinse, drain and towel dry. Remove the frame end piece again (4 screws). Put the charcoal back in the frame; use either old or new charcoal, as required. Replace the frame end piece and 4 screws.

4.Scrub the hood interior and tray (Fig. 5) with warm soapy water, nylon pad or Scotchbrite as required.

5.Reinstall the Charcoal Filter, the Air Filter, and the Grease Filter. Make sure the filters fit right (see POSITIONING HOOD FILTERS in this manual). YOUR APPLIANCE WILL NOT OPERATE

UNLESS ALL THREE FILTERS ARE PROPERLY INSTALLED.

Replacement activated charcoal may be purchased from your local Hobart Sales and Service Office. The charcoal used in the charcoal filter is coconut activated charcoal, 4 x 8 mesh. Approximately 9 pounds is required to refill the filter. Recommended replacement schedule is approximately once every four months of normal use.

TROUBLESHOOTING

If your appliance will not operate:

1.The hood filters may have been incorrectly positioned after cleaning. See POSITIONING HOOD FILTERS in this manual.

2.The fire suppression system is not charged and cocked. Contact your ANSUL® Fire Protection Dealer.

3.The exhaust blowers are not operating. Contact your local Hobart service office.

FORM 34503 (May 2000)

– 8 –

PRINTED IN THE U.S.A.

Image 8
Contents Truct Model HVH23 STAND-ALONE Exhaust Hood Unpacking InstallationGeneral Installation Codes and Standards AssemblyLocation Positioning Hood FiltersAir Filter Grease Filter Electrical Connections Fire Suppression SystemControls CleaningOperation Troubleshooting Unless ALL Three Filters are Properly Installed

HVH23 specifications

The Hobart HVH23 is a state-of-the-art commercial refrigerator designed for high efficiency and reliability, ideal for restaurants, cafes, and other foodservice operations. This model showcases a perfect blend of advanced technology, robust construction, and user-friendly features, making it an essential tool for any commercial kitchen.

One of the standout characteristics of the Hobart HVH23 is its impressive cooling capacity. It employs a powerful refrigeration system that ensures consistent temperatures, even during peak operation hours. The unit's temperature range is adjustable, providing flexibility to accommodate various stored foods. This control is vital for preserving the quality and safety of perishable items.

The HVH23 features a large, spacious interior that maximizes storage space while maintaining easy accessibility. The design includes multiple adjustable shelves, allowing users to customize the layout according to their specific storage needs. This adaptability is coupled with a wide door opening, making it easy to load and unload ingredients efficiently.

In terms of energy efficiency, the Hobart HVH23 is engineered with eco-friendly refrigerants and energy-saving technologies. This not only reduces the environmental impact but also translates into lower operating costs for businesses. The energy-efficient compressor operates quietly, ensuring minimal disruption in busy kitchen environments.

The construction of the HVH23 emphasizes durability and hygiene. Built with high-quality stainless steel, the exterior is resistant to dents and scratches, while the smooth surfaces are easy to clean. The interior features rounded corners, which not only enhance the aesthetic appeal but also facilitate effortless cleaning, ensuring compliance with health regulations.

Another noteworthy technology in the Hobart HVH23 is its electronic control system. This user-friendly interface allows for precise temperature adjustments and clear status indicators, enabling quick and easy monitoring of the refrigeration system.

Furthermore, the HVAC ventilation system of the unit promotes optimal airflow, keeping contents evenly chilled and avoiding hot spots.

Overall, the Hobart HVH23 combines reliability, efficiency, and practicality, making it an excellent choice for any establishment looking to maintain food safety and quality while optimizing energy use. With its robust features and modern technologies, the HVH23 stands out as a leader in commercial refrigeration.