Nuvo manual Installing the NV-T2 Dual Tuner

I. Installing the NV-T2 Dual Tuner

Fig . 1

Stereo Audio Connections

Each tuner has two audio output jacks. One is a stereo RCA connection, and the other is a stereo 3.5mm mini. The RCA output is an individual left and right channel connection made with a standard RCA cable. The other end is connected to the corresponding audio input on the back panel of the audio amplifier. An example of this is one of the source inputs on the back panel of a NuV0 audio distribution system, fig. 1.

The 3.5mm stereo output labeled “AUDIO OUTPUT” is also available for system connection. Compatible cables are

available with the male mini connection on each end, or with a Fig. 2 stereo RCA connection on one end, fig. 2.

AUX IN	OUT		AUX IN	OUT
USE ONLY NuVo
NV-T2PAS	L	TRIGGER	L	TRIGGER
POWERED ANTENNA SYSTEM		ON=+12V		ON=+12V

R	AUDIO	R	AUDIO
	OUTPUT		OUTPUT
IN

ANTENNA INPUT			TUNER B			TUNER A
VARIABLE		VARIABLE		VARIABLE		VARIABLE
OUTPUT	SPEAKER	OUTPUT	SPEAKER	OUTPUT	SPEAKER	OUTPUT
TIP=L	40W/6 OHMS X 2	TIP=L	40W/6 OHMS X 2	TIP=L	40W/6 OHMS X 2	TIP=L
	LEFT RIGHT		LEFT RIGHT		LEFT RIGHT
RING=R		RING=R		RING=R		RING=R

FIXED	FIXED	FIXED	FIXED
OUTPUT	OUTPUT	OUTPUT	OUTPUT

	ZONE 1			ZONE 2		ZONE 3		ZONE 4
1	2	3	4	5	6	1	2	3
						CONNECT TO
						NV-I8X
	L		L	L		USE NV-SLC1
						CABLE
	R		R	R
1	2	3	4	5	6	4	5	6
		SOURCE INPUTS				SOURCE LINK	SOURCE STATUS

	AUX IN	OUT	AUX IN	OUT
USE ONLY NuVo
NV-T2PAS	L	TRIGGER	L	TRIGGER
POWERED ANTENNA SYSTEM		ON=+12V		ON=+12V
	R	AUDIO	R	AUDIO
		OUTPUT		OUTPUT
IN
ANTENNA INPUT		TUNER B		TUNER A

Direct IR Control

The T2 is designed for IR control via IR received by an audio distribution system. In the NuVo Simplese or Essentia audio

distribution systems, the IR emitter outputs act as a repeater Fig. 3 to IR signals incident on the system keypads. The T2's wired IR connector is a 3.5mm two-conductor (mono) jack labeled “IR

INPUT.” Using a mono mini-to-mini patch cable, connect the IR emitter output of a Simplese or Essentia Main Unit to the IR INPUT on the T2. The two tuners in the T2 respond to separate IR codes, so the direct IR input replaces the need for external IR emitters placed over the IR receiver windows on the front of the unit, fig. 3. This connection is not used when using the Concerto NuVoNet system. The NuVo Essentia and Simplese systems are used for example, but the T2 is compatible with any audio system that is capable of repeating IR.

VARIABLE			VARIABLE			VARIABLE			VARIABLE
OUTPUT	SPEAKER		OUTPUT	SPEAKER		OUTPUT	SPEAKER		OUTPUT
TIP=L	40W/6 OHMS X 2		TIP=L	40W/6 OHMS X 2		TIP=L	40W/6 OHMS X 2		TIP=L
	LEFT	RIGHT		LEFT	RIGHT		LEFT	RIGHT
RING=R			RING=R			RING=R			RING=R
FIXED			FIXED			FIXED			FIXED
OUTPUT			OUTPUT			OUTPUT			OUTPUT
ZONE 1			ZONE 2			ZONE 3			ZONE 4

1	2	3	4	5	6	1	2	3
						CONNECT TO
						NV-I8X
	L		L		L	USE NV-SLC1
						CABLE
	R		R		R
1	2	3	4	5	6	4	5	6
		SOURCE INPUTS				SOURCE LINK	SOURCE STATUS

Model NV-T2DF

NuVoNet

Dual XM Tuner

IR PASS-THRU

NuVo Techonlogies LLC•Cincinnati Ohio USA

www.nuvotechnologies.com

RS 232

IR INPUT

RTE

K

TERTEK

3033118

SPEAKER

VARIABLE

VARIABLE

VAR.

OUTPUT

SPEAKER

OUTPUT

SPEAKER

OUT

40W/6 OHMS X 2

TIP=L

40W/6 OHMS X 2

TIP=L

40W/6 OHMS X 2

RS 232

LEFT

RIGHT

LEFT

RIGHT

LEFT

RIGHT

RING=R

RING=R

FIXED

FIXED

FIX.

OUTPUT

OUTPUT

OUT

ZONE 5

ZONE 6

ZONE 7

ZONE 8

PROGRAM

USE CNLY WITH 250V FUSE

1

2

3

4

1

2

3

SUM1

SYS ON

CONNECT TO

CONNECT TO

MODEL NV-I8M

SIX SOURCE EIGHT ZONE

NV-I8EZP1

NV-I8X

AUDIO DISTRIBUTION SYSTEM

120V

60Hz 500W

FUSE:T5 A

USE NV-NC1

USE NV-SLC1

NuVo Technologies Cincinnati Ohio USA

CABLE

CABLE

www.nuvotechnologies.com

5

6

7

8

4

5

6

SUM2

EXT. MUTE

CONFORMS TO

UL STD.6500

CERTIFIED TO

ZONE TRIGGER OUTPUTS

EMITTER OUTPUTS

SYSTEM

NETWORK

DIGITAL LINK

3033118

CAN/CSA STD.E60065

Page 9