Euro-Pro KB305E How to Use Your Blender Watt Power Unit, Progressive Variable Speed Control

Fig. 4

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

The Quad-Blade Blender is an indispensable kitchen tool for blending, chopping or pureeing when preparing your favorite recipes. For best results, be sure to carefully read all the instructions contained in this book before using this appliance.

How to Use Your Blender

Caution - Blades are sharp. Use extreme caution when handling the

Caution: When working with hot foods or liquids, always remove the measuring cap from the blender jar

700 Watt Power Unit

The 700 Watt Power Unit operates on 120V., 60Hz. electrical power. Never allow the power unit to become wet when plugged into an electrical outlet.

Warning: The power unit should never be immersed in water.

Caution: Make sure that the power unit is unplugged from power source and the blades have stopped turning before attaching or removing any accessory.

Important: Do NOT operate the appliance when empty as it could damage the power base.

Assembling the Blender

Caution - Blades are sharp. Use extreme caution when handling the blade assembly, always hold it by the base of the blade assembly. (Fig. 1) NEVER HANDLE BY BLADES, VERY SHARP. Do not immerse the power base in water or any other liquid.

Glass Blender Jar Assembly

1.Place jar upside down on a flat level surface. (Fig. 2)

2.Place the rubber gasket on the rim of

the blender jar. (Fig. 2)

3.Holding the blade assembly by the base, place it carefully over the rubber gasket. (Fig. 2)

4.Place the retainer ring over the base of the blade assembly and screw on tightly. (Fig. 2)

5.Before placing the assembled blender jar on the power base, make sure that the unit is not plugged in and that the speed control dial is in the "OFF" position. (Fig. 3)

Fig. 1

Retainer Ring

Blade Assembly

Rubber Gasket

Blender Jar

Fig. 2

Fig. 3

blade assembly, always hold it by the base of the blade assembly. (Fig. 1) Do not immerse the power base in water or any other liquid.

Caution: Make sure that the power unit is unplugged from power source and the blades have stopped turning before attaching or removing any accessory.

Important: Do NOT operate the appliance when empty.

1.Place the power base on a dry, level surface.

2.Make sure that the On/Off-Variable Speed Control Dial is in the "OFF" position.

3.Place the blender jar into position on the power base.

(Fig. 4)

4.Plug the power cord into the electrical outlet.

5.Add ingredients to the blender jar

as directed by your recipe.

6.Place the blender jar cover on the blender

jar with the measuring cap in place. Make

sure that the measuring cap is securely in place by turning it clockwise to lock. Always hold the measuring cap firmly in place during processing so that it does not come loose.

7.If you need to add additional ingredients while the blender is processing, just remove the measuring cap and pour the ingredients in through the opening in the blender jar cover.

8.Turn the variable speed control dial clockwise until the desired speed is reached. Speed may be varied during processing.

9.After use, always turn the unit to the "Off" position and unplug the power cord from the electrical outlet before removing the blender jar from the

power base.

CAUTION: NEVER REMOVE THE BLENDER JAR FROM THE POWER BASE WHILE THE BLENDER IS STILL RUNNING.

cover to vent the steam. Keep hands and other exposed skin away from the opening to prevent possible burns or scalding. Do not use more than two (2) cups of hot liquid at a time.

Progressive Variable Speed Control

The Quad-Blade Blender is equipped with a progressive variable speed control. It gives the user the ability to increase or decrease the processing speed easily during use.

decrease

increase

Note: Always turn appliance to the "Off" position after use and unplug the power base.

To remove the blender jar, lift it straight up; there is no need to twist it.

Due to differences in amounts and desired consistencies of some processed foods, a higher or lower speed may be required.

Pulse Function

Use the Pulse function when you need an extra burst of speed but only when you are below the "MAX" (maximum) speed level.

You can use the Pulse function to crush ice, but ice may also be crushed at lower speeds as well. Crush only about 8-10 oz. of ice at a time.

To clean the blender, fill the blender with warm water and a drop of dishwashing liquid and pulse a few times and then remove the blender jar from the power base and rinse the blender jar.

3

4