A
Am, WARNING: Whenservicing,use onlyidentice_
repianementpaps. Use ofany other parts m_y create
ahazardorcauseproduct damage.
A
Am. WARNING: A_vayswear safety goggles orsafety
glasses withside shietdsduringpower too_opera,on
orwhen blowing dust. If operationis dusty,also wear
a dust mask.
GENERAL
Avoidusing so(ventswhen cteaning p_,stioparts. Most
plasticsaresuscsptibteto damage from varioustypes of
commercialsolventsend may be damaged by theiruse.
Useclean cloths to removedirt, dust, o11,grease,etc.
_1_ WARNING: Donot at any Limeletbrake fluids,
gaso(ine,petro(eum-basedproducts,penetrating
oils,etc., come In ¢on_actwith pta_'=oparts.
Chemicatscan damage,weaken, or destroyp_stic
whichmay resuttIn seriouspersonal injury.
•Periodicallycheckall clamps,nuts, boits, screws, and
_{ts _art_hl.r_ss and cond_,_n,Make sure the t_roat
p_te is (ngood cond(t(on a.nd_. position.
• Check the blade guardassembty.
• To maintain the t_btesur_css, fence, and raits,
pedodice]Iyapplypaste wax to them and buff to
providesmoothfunctioning. To preventwork from
slippingduringcuttingoperation, Do not wax the
workingface of the miter fence.
•Protectthe bb.de by cleaningout saw dust from
underneaththe _b(e and in the b{ade teeth. Use a
reamsolventon _heb_ade teeth.
•Clean plastio parts only with asoft damp cloth. Do
not use anyaerosol or petroleumsolvents.
LUBRICATION
Thissaw has been lubricatedat the factory prior toship-
ment. Foflowingextendeduse, you shouldinspect and
lubricatethe following areastoassure smooth operation.
LOCKER BRACKET ASSEMBLY
See Figure69.
• Add dry lube between both bevel gears, theb_ckup
washers,andthe locker braoket..
• Adddrylubs be_:weenthreadedhole in motor casting
andthreaded elevatingshaft.
RecommendedLubricants:DrySilicone or Tenon
Lubricant
THREADED
HOLE
BEVEL
GEAR
ELEVATINGSHAFT
TILT/ELEVATING MECHANISM
See _gure 70.
•Add dry [ubebetween me handle shaft and the boreof
theP.,bmpingboil
• Add dry lube between the face of the clampingbolt
andtheface of the handle sh_ft.
•Add dry lubeon the inner surfacesof the bevel Ioclong
leverwhich corr_sctsthecam.
CLAMPING
BOLT CAM
SURFACE
HANDLE
SHAFT
CAM
HANDWHEEL
BEVEL
LOCKING
LEVER
COMPRESSION
SPRING
HEIGHT/BEVEL
ADJUSTING
HANDWHEEL Fig.70
45