IPROBLEM CAUSE SOLUTION !
Wood edges away fromrip Ripfence is misaligned. Checkand adjustthe rip fence.
fencewhen ripping. Bladenot properlyeh,_rpenedor Reeharpenor set blade.
set,
Slidingmiter table aSSembly Miterbase orslides improperly See page26 for adjustments tosliding
does notmove smoothly, adjusted, miter tableassembLy.
Saw does not makeaccurate 90 Posltlvestops insidecabinet need Adjustpositivestops.
or45 degree cuts. adiusting(BevelCuts):
Mitergauge is misaligned(Miter Adjustthe mitergauge.
Cuts).
Bladeadjusting handleis hard Gearsor Screw Post inside Clean thegears or screw poet.
to turn, cabinetare ckiggsd with
dust.
Saw does notstart. Motorcordor wall cord is not Plugin motor cord or wall cord.
pluggedin.
Cirouitfuse isblown.
Circuitbreakeristripped.
Cordor switch is damaged.
Replacecircu'_fuse.
Resetcircuitbreaker.
Have the cordor switch replacedat your
SearsServiceCenter/Department.
Blademakes poor cuts. Bladeis dull ordirty.
Blade is wrongtype for cutbeing
made.
Bladeis mounted backwards.
Clean,sharpen, or replace blade.
Replacewith correcttype.
Remountblade.
Bladedoes not lowerwhen
turningblade adjustinghandle.
Backside of rivingknife has
comein contact wff.hsawtable.
Lockinglever is notat full left
position.
Realignand adjusttheriving knife.
Move _ockingleverto left.
Motor taborsinrip cut, BJadenotproper for rip cut. Change blade; rip blade typicallyhas fewer
teeth.
47