Speed Control Dial, Operating the Food Processor

Fig. 2

OPERATING INSTRUCTIONS

Speed Control Dial

The food processor speed control dial has two speeds settings plus "Pulse" and "Turbo".

1 - Low

2 - High

The speed can be adjusted while the food processor is in use.

Use of the Pulse/Turbo button allows

Using The Double Chopping Blade

Always disconnect unit from power source before cleaning or changing accessories.

WARNING: USE EXTREME CAUTION WHEN HANDLING THE BLADES. THEY ARE EXTREMELY SHARP. ALWAYS REMOVE PROTECTIVE BLADE COVERS BEFORE USING.

3.Place ingredients to be processed in the bowl.

4.Then holding the processor lid by the feeding tube, place the processor lid onto the bowl and turn counter clockwise to lock the lid in place. Ensure that the lid tab has "clicked" into place and that the arrow on the lid is aligned with the dot on the unit. (Fig. 5 & Fig. 6)

8.Keep hands and utensils away from the cutting blade while chopping food., to reduce the risk of severe injury to persons or damage to the food processor. A scraper may be used, but ONLY when the food processor is NOT running and has been unplugged. Never feed food by hand. Always use the food pusher. (Fig. 7)

greater control over the texture of the food being processed. Use "Pulse" when the unit is in the "Off" position. Use "Turbo" when the unit is in the "On" position and you need a burst of power.

The double chopping blade may be used with one blade or with

two blades.

Fig. 7

Please note that the "Pulse" and "Turbo" is only intended to be used for short "bursts" of processing.

1. To use as

a double

blade, carefully

Double Main Blade Blade

Fig. 5

Fig. 6

Operating the Food Processor

Setting up:

1.	CAUTION: Make sure that the unit is
	unplugged from the power source and
	the the Speed control dial is in the
	"Off" position before inserting or
	removing any attachments and before
	cleaning.
2.	Place the food processor bowl onto
	the processor body. There is no need
	to turn the bowl. (Fig. 1)
3.	When fitted correctly, the handle will

slip the separate

blade over the

shaft of the

main blade.

(Fig. 2 & Fig. 3)

Fig. 3

Two Blades

Together

5.Insert food pusher.

6.Plug the processor into a wall outlet.

7.Turn the speed control dial to the desired speed setting.

9.When finished processing the ingredients, remove the processor lid by turning clockwise.

10.Remove the chopping blade first before removing the processed food.

FOR SAFETY, ALWAYS USE THE FOOD PUSHER WHEN PUTTING FOOD INTO THE THE FEEDER TUBE. NEVER FEED BY HAND.

11. Do NOT leave the appliance

unsupervised when it is in the "ON"

position.

fit into the slot at the base of the unit.

Fig. 1

4.Now you are ready to use any of the attachments that come with the unit; i.e. the double chopping blade, dough blade, etc.

2.Then insert onto the shaft of the processor bowl. Always hold the chopping blade by the upper plastic part. (Fig. 4)

Fig. 4

PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE

The processing times indicated below are approximate and also depend on the quantity of the food to be processed and the degree of fineness you require.

PRODUCT	QUANTITY	RECOMMENDED	OPERATION TIMES
PRODUCT	QUANTITY	SPEED	OPERATION TIMES
		SPEED
Meat*	24.5 oz / 700 gr.	High/Turbo	15 - 30 seconds
Onions	24.5 oz / 700 gr.	Low	15 - 30 seconds
Nuts	21 oz / 600 gr.	High	15 - 30 seconds
Fish*	24.5 oz / 700 gr.	Pulse	15 - 30 seconds
Cheese	24.5 oz / 700 gr.	Pulse	15 - 30 seconds
Liquids (soups)	24.5 oz / 700 gr.	Pulse	20 seconds
Carrots	24.5 oz / 700 gr.	pulse	40-50 seconds
Bread	4 slices	Low	40 - 50 seconds
Apples	24.5 oz / 700 gr.	High	10 - 30 seconds
Parsley	Max 4 bunches	High/Turbo	10 seconds
Mayonnaise	Max 4 cups/1 liter	High	30 seconds

* Always allow food to cool before placing in the bowl.
* Remove all bones before processing.	5
	5

OPERATING INSTRUCTIONS