Panasonic PV-GS50-K Using the Menu Screen, File Selection in the Card Playback Mode l58

	2, 3, 4, 5
1	1, 2
	W.B / SHUTTER / IRIS
	PUSH
	MF / VOL / JOG
	M ENU

2	CAMERA
3				FF	MODE
	VCR			N
4		1		O
	CARD		O

PB

2

CAMERA FUNCTIONS

1.CAMERA SETUP 2.DIGITAL EFFECT 3.CARD SETUP 4.MULTI-PICTURES 5.RECORDING SETUP 6.DISPLAY SETUP 7.OTHER FUNCTIONS1 8.OTHER FUNCTIONS2

PUSH MENU TO EXIT

3

VCR FUNCTIONS

1.PLAYBACK FUNCTIONS 2.DIGITAL EFFECT 3.CARD SETUP 4.MULTI-PICTURES 5.RECORDING SETUP 6.AV IN/OUT SETUP 7.DISPLAY SETUP 8.OTHER FUNCTIONS

PUSH MENU TO EXIT

4

CARD FUNCTIONS

1.DELETE CARD FILE 2.CARD EDITING 3.DISPLAY SETUP 4.OTHER FUNCTIONS

PUSH MENU TO EXIT

	DATE/	PHOTO	START/
OSD			STOP
	TIME	SHOT
COUNTER RESET		TITLE	ZOOM
MULTI/			T
	¥REC	A.DUB
P-IN-P			r
			sVOL
V/REW	PLAY	FF/W	W
6	1	5
STILL ADV	PAUSE	STILL ADV
E	;	D
INDEX	STOP	INDEX
K	∫	L		5
SELECT	VAR.		P.B.
	SEARCH		ZOOM
STORE		MENU		7
OFF/ON			SET	6
P.B.DIGITAL			ITEM

PICTURE

8

No.25 100-0012

Using the Menu Screen

To facilitate the selection of a desired function or setting, this Palmcorder displays various function settings on menus.

1Press the [MENU] Button.

≥The Menu corresponding to the Mode selected by using the [OFF/ON/MODE] Switch 1 is displayed.

≥When the [CAMERA] Lamp is on, the Camera Function Menu is displayed. 2

≥When the [VCR] Lamp is on, the VCR Function Menu is displayed. 3

≥When the [CARD PB] Lamp is on, the Card Function Menu is displayed. 4

2Rotate the [PUSH] Dial to select a desired Sub-Menu.

3Press the [PUSH] Dial to display the selected Sub-Menu.

4Rotate the [PUSH] Dial to select the item to be set.

5Press the [PUSH] Dial to set the selected item to a desired Mode.

≥With each press of the [PUSH] Dial, the cursor [1] brings up a subsequent Mode. Menu items that cannot be used in combination with the selected menu items are displayed in

dark blue.

≥While a Menu is displayed, you cannot begin to record or play back. Menus can be displayed during playback but not during recording.

≥The above operations can be carried out using the Remote Controller. (l15)

≥To display the Menu, press the [MENU] Button 5 on the

Remote Controller.

≥To select items on the Menu, press the [ITEM] Button 6 on the Remote Controller.

≥To set the mode for the selected items, press the [SET]

Button 7 on the Remote Controller.

To Exit the Menu Screen

Press the [MENU] Button again.

About the Menu Mode Setting

The setting selected on the Menu will be retained even when the Palmcorder is turned off. (But, the setup of [EFFECT2] (l39) will not be retained.) If, however, the Battery or AC Adaptor is disconnected before turning the Palmcorder off, the selected setting may not be retained.

≥Menu operation flow is shown in this text by >>.

ªFile Selection in the Card Playback Mode (l58)

A File Selection Operation may be necessary during Menu Operations. In this case, carry out the following procedure.

1Turn the [PUSH] Dial and select a file.

≥The selected file is marked by a frame 8.

2Press the [PUSH] Dial to confirm the selection of the

file.

≥After the above File Selection Procedure, carry out the various Menu Operations. (The above procedure will not be repeated in the following instructions.)

22