Panasonic PV-GS50-K Digital Electronic Image Stabilizer Function, Fade In/Out Functions

W.B / SHUTTER / IRIS

1	PUSH
	MF / VOL / JOG
	M ENU

2 PHOTOSHOT

EIS 1

2	PHOTO	2
	SHOT

1, 3 FADE

1

2

Digital Electronic Image Stabilizer Function

If you are recording in unstable situations and the Palmcorder is shaky, you can use this function to correct for camera shake in these images.

≥If the Palmcorder shakes too much, this function may not be able to stabilize images being recorded.

1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [EIS] >> [ON].

≥The [EIS] Indication 1 appears.

2Press the Recording Start/Stop Button or [PHOTO SHOT] Button to start recording.

Canceling Digital Electronic Image Stabilizer

Set [EIS] on the [CAMERA SETUP] Sub-Menu to [OFF].

≥For other notes, see page 86.

~~~~~~~~~~~~~~~~~~~~~~

Fade In/Out Functions

Fade In 1

Fade In brings out images and sounds gradually from a black screen at the beginning of a scene.

1Hold down the [FADE] Button while the Palmcorder is set to the Recording Pause Mode.

≥The image fades out gradually.

2When the image is completely gone, press the Recording Start/Stop Button to start recording.

3Release the [FADE] Button about 3 seconds after starting recording.

≥The image reappears gradually.

Fade Out 2

Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene.

1Hold down the [FADE] Button while recording.

≥The image fades out gradually.

2About 3 seconds after the image is completely gone, press the recording Start/Stop Button to stop recording.

3Release the [FADE] Button.

≥Fading-in and fading-out cannot be used when recording still pictures in the PhotoShot Mode, Digital Still Picture Mode, Multi-Picture Mode, and for the small still picture in the Picture-in-Picture Mode.

32