Panasonic PV-GS50-K Recording to a Card from other Equipment l54, Card Playback l56

≥The following functions are disabled. ≥Self-timer (l30)

≥Zoom Microphone Function (l31)

≥Digital Zoom (l31)

≥Fade In/Out Function (l32) ≥Digital Effect Functions (l39) ≥Title In/Creation (l61)

≥Even if the [CINEMA] is set to [ON], the black bars cannot be recorded on top and bottom of the picture.

≥The sound is recorded in monaural, that is, mixed

[L]and [R] of the stereo sound.

ªRecording to a Card from other

equipment (l54)

If you set the [TAPE/CARD/CARD MODE] Selector to [CARD], you can use the Card PhotoShot Function for externally input signals. (Not during recording.)

≥Black streaks may appear at the four edges of the image.

≥When the [PHOTO SHOT] Button is pressed, the image may seem to move backward momentarily, but this does not affect the recording.

≥If the [VOICE] Indication is displayed, recording to a Card is not possible.

≥While recording with analog input, a Card PhotoShot Function cannot be used.

ªCard Playback (l56)

≥If a blank (nothing recorded) Card is played, the screen becomes white and the [NO PICTURE], [NO MPEG4 DATA] or [NO VOICE DATA] Indication appears depending on the mode selected.

≥If you attempt to play back if file recorded in a different format or if file data is defective, the [k]

Indication and the [CARD ERROR] Indication could appear as a warning.

≥When the pictures recorded by another Palmcorder are played back with this Palmcorder, the size of the pictures may be different from the recorded size.

≥This Palmcorder can also play back the

Mega-Pixel still pictures up to 2560k1920 size recorded with the other equipment. However it takes longer than usual time, and the picture may not be playable.

≥When playing back a nonstandardized file, the Folder-File Number may not be displayed.

≥When playing back the MPEG4 moving picture with fast moving subject or zooming operation, the image seem to stop momentarily, or a mosaic like pattern may appear. This is not a malfunction.

≥MPEG4 data or Voice data will not be output from DV Terminal.

≥MPEG4 data cannot perform Cue/Review Playback, Slow Motion Playback (forward direction and reverse direction), Still Advance Playback (forward direction and reverse direction) or Jog Playback.

≥During automatic copying of tape pictures onto a card, the remaining number of pictures that can still be recorded on the Card is displayed. When it becomes [0], the tape is set to the Recording Pause Mode.

≥For the MPEG4 moving pictures recorded on a camera other than this camera, “k” may be displayed when they are played back. If the [1] Button is pressed in this case, “!” will be displayed for a few seconds and the next image will be displayed.

≥For the still images recorded on the camera other this camera, the mega-pixel image size may be displayed.

≥If an MPEG4 motion picture is played continuously for a long time, the playback may stop in the midway and the video camera may freeze while a still picture is being displayed. If this happens, press the [RESET] button.

≥When performing Cue or Review Playback of voice data, the Playback elapsed time may not correspond to the actual recording time of the sound.

≥When playing back an MPEG4 or voice data recorded by other equipment, a part of the playback elapsed time may be indicated as [--].

ªVoice Power Save (l24)

≥Voice Power Save Function automatically shuts off the monitor to reduce the power consumption when no operation is being performed in the Voice Recording Mode. When [VOICE POWER SAVE] on the [OTHER FUNCTIONS1] Menu is set to [ON], the power save function is activated, and the screen turns off in a few seconds after operations, such as play or recording, are performed.

≥The Voice Power Saving Function is cancelled when any operation is performed.

≥Do not forget to turn off the power.

90