Panasonic PV-GS50-K Listening to Playback Sound Through Headphones, Playback Zoom Functions l45

ªListening to Playback Sound

Through Headphones

If you want to listen to the playback sound of a tape through headphones, set [AV JACK] on the [AV IN/ OUT SETUP] Sub-Menu to [OUT/PHONES] and connect the headphones to the [PHONES] Jack on this Palmcorder. In this case, no sound (including warning sounds and shutter sounds) will be reproduced through the built-in speaker of the Palmcorder. When the A/V Cable is inserted into the AV Jack, the internal speaker works.

ªSelecting the Sound during

Playback (l42, 49)

You can select the sound by using the [AUDIO OUT] on the [PLAYBACK FUNCTIONS] Sub-Menu. STEREO: Stereo Sound (main sound and

subsound)

L:Left channel sound (main sound)

R:Right channel sound (sub sound)

≥If you dub a tape recorded at the [12bit] selected as the [AUDIO REC] setting, playback sound becomes stereo sound regardless of whether [12bit AUDIO] is set to [MIX] or to [AUDIO OUT].

ªPlayback Zoom Functions (l45)

≥You cannot adjust volume with the Remote Controller in Playback Zoom Mode.

≥If you turn off the Palmcorder, or if you switch from VCR Mode to Camera Mode, Playback Zoom Mode is automatically cancelled.

≥Even if Playback Zoom Functions are being used, images that are output from the DV Terminal or Digital Still Picture Terminal are not enlarged.

≥As you enlarge an image, the quality of image suffers.

≥During the Playback Zoom Function, the Variable Speed Search Function cannot be used with the Remote Controller.

ªIndex Search Functions (l46)

≥Index Search may not be possible at the beginning of tape.

≥Because PhotoShot Index Signals are not recorded on still pictures recorded in Continuous PhotoShot Mode, the PhotoShot Index Search Function cannot be used for these still pictures.

≥Scene Index Search may not function properly if the interval between 2 scene index signals is shorter than 1 minute.

≥For the still pictures taken in the Continuous PhotoShot Mode or Digital Still Picture Mode, PhotoShot index signals are not recorded.

ªPlayback Digital Effect Functions

(l47)

≥Revised signals of images to which digital effects are added during playback cannot be output from the DV Terminal or Digital Still Picture Terminal.

≥You cannot use the Wipe Function or Mix Function while playing back the non-recorded portion of tape.

Multi-Picture Mode (VCR Mode) (l48)

≥The quality of Multi images deteriorates slightly. ≥Playback multi-mode screens cannot be output

through DV Terminal or Digital Still Picture Terminal.

≥If there is input from the DV Terminal, a multi screen cannot be created.

≥When signals are input from S-Video Input/Output Jack or Audio-Video Input/Output Jack, a multi screen cannot be re-displayed.

≥Signals input from S-Video Input/Output Jack or Audio-Video Input/Output Jack cannot be displayed on a multi screen.

≥If you switch the Palmcorder from the Index Multi-Picture Mode over to the Camera Mode, the setting of [SCAN MODE] on the [MULTI-PICTURES] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu is automatically set to [STROBE].

ªAudio Dubbing (l50)

≥The blank section of a tape cannot be dubbed. ≥Sounds sent through the DV Terminal cannot be

dubbed.

≥If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

≥If you set the tape counter back to 0 at the position where you want to stop Audio Dubbing so as to make it possible to use the Memory Stop Function (l96), Audio Dubbing is terminated automatically when the tape reaches this position.

≥In the case of importing data recorded with Audio Dubbing to a Computer using the Computer’s software program, only the original sound (ST1) may be imported, depending on the software

program.

Microphone Jack

When audio dubbing is carried out through an external microphone or audio equipment, connect it to the [MIC] Jack. In this case, the built-in microphone of the Palmcorder will be turned off.

88