Panasonic PV-GS50-K operating instructions To Stop Audio Dubbing, ≥A.DUB Indication appears

1, 2	PUSH
	W.B / SHUTTER / IRIS
	MF / VOL / JOG
	M ENU

		DATE/	PHOTO	START/
	OSD			STOP
		TIME	SHOT
	COUNTER RESET		TITLE	ZOOM
	MULTI/			T
		¥REC	A.DUB
	P-IN-P			r
				sVOL
	V/REW	PLAY	FF/W	W
	6	1	5
3, 5	STILL ADV	PAUSE	STILL ADV
	E	;	D
	INDEX	STOP	INDEX
	K	∫	L
	SELECT	VAR.		P.B.
		SEARCH		ZOOM

1A.DUB;

2A.DUB!

Audio Dubbing

You can add music or narration to the recorded Cassette.

≥If you perform audio dubbing onto a tape that was recorded with [AUDIO REC] on the [RECORDING SETUP] Sub-Menu of the [CAMERA FUNCTIONS] Main-Menu set to [16bit], the original

sound is erased. (If you want to preserve the original sound, use the [12bit] Mode when recording.)

≥Audio Dubbing cannot be performed onto recordings made in LP Mode. (l27)

1Set [VCR FUNCTIONS] >> [AV IN/OUT SETUP] >> [AV JACK] >> [IN/OUT].

2Continuing the aforesaid setup, select [A.DUB INPUT] >> [MIC] or [AV IN].

≥Set to [AV IN] when external device is used, and to [MIC] when an external or built-in microphone is used.

3Switch the Palmcorder over to the Still Playback

4Mode where you want to add new sound track.

4Press the [A.DUB] Button on the Remote Controller.

≥[A.DUB;] Indication appears. 1

5To start Audio Dubbing, press the [;] Button on the

Remote Controller.

≥[A.DUB!] Indication appears. 2

To Stop Audio Dubbing

Press the [;] Button on the Remote Controller.

The Palmcorder is in the Still Playback Mode again.

To dub audio while listening to a pre-recorded sound

When pausing the audio dubbing, set the [12bit AUDIO] on the [PLAYBACK FUNCTIONS] Sub-Menu to [ST2] and you can check the pre-recorded sound. When a microphone is used for audio dubbing, use headphones to listen to the pre-recorded sound while dubbing the audio. (When using headphones, set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu to [OUT/PHONES].) When the line input is used, you can dub audio while listening to a pre-recorded sound from the speaker.

Playing Back the Sound Recorded with Audio Dubbing (For 12 bit Audio Recording)

Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [12bit AUDIO] >> [ST2] or [MIX].

ST1: Play back only the original sound.

ST2: Play back only the sound added by Audio Dubbing.

MIX: Play back both the original sound and the sound added by Audio Dubbing simultaneously.

≥For other notes, see page 88.

50