Before Use

2

11

1 ON MODE

O

FF

2

2

33 180x

490x

LCD/EVF SET

LCD BRIGHTNESS

LOW----HIGH

LCD COLOR LEVEL

LOW----HIGH

EVF BRIGHTNESS

LOW----HIGH

PUSH MENU TO RETURN

Using the Viewfinder

Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.

1Pull the Viewfinder.

2Adjust the Viewfinder by sliding the Eyepiece Corrector Knob 1.

Using the LCD Monitor

With the LCD Monitor open, you can also record the picture while watching it.

1Set the [OFF/ON/MODE] Switch to [ON].

2Put your finger on the [OPEN 4] Tab 2 on the underside of the LCD Monitor and pull the LCD Monitor out about 90x in the direction of the arrow.

The Viewfinder goes off.

3Adjust the LCD Monitor angle according to the

desired recording angle.

The LCD Monitor can rotate a maximum of 180x 3 from the

vertical position to the upward direction and a maximum of 90x

4to the downward direction. Forcefully rotating the LCD monitor beyond these ranges will damage the Palmcorder.

Closing the LCD monitor

Push the LCD Monitor until it is securely locked. Make sure the Card Slot Cover is closed.

ªAdjusting Brightness and Color Level

When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES], the following items are displayed:

LCD Brightness [LCD BRIGHTNESS]

Adjusts the brightness of the image on the LCD screen.

LCD Color Level [LCD COLOR LEVEL]

Adjusts the color saturation of the image on the LCD screen.

Brightness of the Viewfinder [EVF BRIGHTNESS]

Adjust the brightness of the image in the Viewfinder.

1Press the [PUSH] Dial and select the item you want to adjust.

2Rotate the [PUSH] Dial and increase or decrease the number of the vertical bars on the Bar Indication.

The Bar Indication has 8 steps. A larger number of vertical bars indicates stronger brightness or color saturation.

Increasing the Brightness of the Entire LCD Monitor

Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].

These adjustments do not affect the recorded images.

For other notes, see page 95.

21

Page 21
Image 21
Panasonic PV-GS50-K Using the Viewfinder, Using the LCD Monitor, 90x, Adjusting Brightness and Color Level