Control Lock
The Control lock feature disables all of the buttons on the dishwasher.
To activate the Control Lock:
1.Press and hold the Lock button until you hear 1 beep (about 3 seconds).
2.To cancel, press and hold the Lock button until the indicator light turns off.
Keylock
The Keylock feature locks the drawer closed and disables the dishwasher and all the but- tons.
To activate the Keylock:
1.Press and hold the Lock button until you hear the 2nd beep (about 5 seconds).
2.To cancel, press and hold the Lock button until the indicator light turns off.
Delay Start Mode
The start of the selected wash program can be delayed from 1 to 12 hours.
To activate the Delay Start:
1.Press and hold the Start/Pause button until the indicator light turns orange or lavender, depending on the model.
2.The dishwasher will beep as you hold down the button. Each “beep” represents an hour delay, so for each beep while the button is pressed an additional hour delay will be programmed until the desired delay time is reached.
3.Make sure the drawer is closed.
4.The dishwasher will start after the set delay time has elapsed.
To cancel the Delay Start:
1.Press the Power button, or hold the Start/ Pause button until the indicator light turns green or blue, depending on the model.
OR
Power Button | Start / Pause Button |
To enter the Option Adjustment Mode
1.Press the Power button to turn the dish- washer to the Normal operating mode.
2.Simultaneously press and hold the HI TEMP and Lock buttons for 5 seconds. One long beep will sound, and the Start/ Pause indicator light will be red.
3.Release the HI TEMP and Lock buttons.
4.Use the appropriate buttons on the control panel to make the necessary adjustments. These are explained below.
5.Once the changes have been made, press the Power button to return to the Normal operating mode.
NOTE: The dishwasher automatically saves the changes.
To adjust the Rinse Aid setting
1.Enter the Option Adjustment Mode as explained above. The indicator light above the Start/Pause button will be red to indi- cate that this setting has been chosen.
2.The current Rinse Aid setting is shown on the wash program display panel. If 4 red lights are lit on the panel, then the Rinse Aid setting is at 4.
HEAVY NORMAL QUICK LIGHT/ RINSE
CLEAN CHINA
