4.Pull the bottom drawer runners all the way out. Make sure the latches on the back of each drawer runner are facing forward.
drawer
runner latch
latch bracket
If the bottom drawer was rotated, rotate the drawer to unwind the hoses and then place the drawer on the runners, making sure the hoses are looping upward.
Make sure both runner clips have snapped into place. If not, pull the runner clips forward until they do.
Close the bottom drawer.
5.Optional: If the top attaching brackets are used, slightly open the top drawer.
Screw the top attaching brackets to the underside of the counter with two #8 phillips screws.
The top attaching brackets can accommo- date a maximum 3/4″ (19 mm) vertical gap.
Close the top drawer.
