KitchenAid KAD-9 manual Direct Wiring

DIRECT WIRING

WARNING

Electrical Shock Hazard

Disconnect electrical power at the fuse box or circuit breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

1.Disconnect power. Open the bottom drawer.

Press in the right-hand runner clip and push it back about 6″ (15.2 cm).

Repeat with the left-hand runner clip.

NOTE: When removing the drawer there is limited range of movement due to the attached water hoses.

Lift the right edge of the drawer off its runner. Slide the runner back into the dishwasher. Lift the drawer completely off the left-hand runner.

Rotate drawer to the right onto its side and place on the protective cover.

Slide the left-hand runner back into the dishwasher.

2.The electrical cover is located in the back left corner.

Use a flat blade screwdriver to press the release button. Slide the cover to the right and then pull up.

electrical cover

runner clip

press release button

2-7