FAILED TEMP SENSOR OR ELEMENT
Failed Heater Element
1.Unplug dishwasher or disconnect power.
2.Check resistance of element; replace heater plate if necessary.
Temperature Sensor Failed
1.Unplug dishwasher or disconnect power.
2.Check resistance of temperature sensor; replace heater plate if necessary.
Bad Wiring Or Connections
1.Unplug dishwasher or disconnect power.
2.Check element edge connector, wiring and electronic controller connection.
Electronic Controller Failed
1.Unplug dishwasher or disconnect power.
2.Replace electronic controller if necessary.
FLOOD SWITCH ACTIVATED
Lid Not Sealing Correctly
1.Unplug dishwasher or disconnect power.
2.Remove lid and repair or replace lid or motor assembly.
Water Valve Leaking
1.Unplug dishwasher or disconnect power.
2.Tighten connections or replace valve as necessary.
Spray Arm Is Split
Replace spray arm.
Spray Arm Not Turning Freely
Clear any obstructions to spray arm.
Split Inlet Hose
Replace inlet hose.
Split Drain Hose
Replace drain hose.
Blocked Drain Hose
Clear hose blockage.
Heater Plate O-Ring Leaks
1.Unplug dishwasher or disconnect power.
2.Replace
Moisture / Foreign Matter On Chassis Board Flood Switch PCB
1.Unplug dishwasher or disconnect power.
2.Clean chassis PC board and flood switch area.
Power Failure To Lower Tub Causes Flood Error Code On Top Tub
1.Unplug dishwasher or disconnect power.
2.Replace chassis PC board.
