4-15

REMOVING THE CHASSIS MODULE AND POWER CORD
1. Unplug dishwasher or disconnect power.
2. Turn off the water going to the dishwasher.
3. Disconnect the drain line from the dish-
washer.
4. Remove the bottom dishwasher drawer
(see page 4-9 for the procedure).
5. Position the dishwasher drawer to the
side, out of the way. Be careful not to
stress the hoses and wiring.
6. Use a flat-blade screwdriver and press the
release button. Slide the chassis module
cover to the right, and then pull it up to
remove it.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Press Release Button
Chassis Module Cover
7. To remove the chassis module:
a) Remove the screw from the chassis
module (see the photo at the top of the
right column).
b) Unhook the locking tab from the mod-
ule and lift the module out of its holder.
c) Disconnect the eight wire connectors
from the module.
8. To remove the power cord:
a) Disconnect connectors P408 (white)
and P409 (black) from the terminal strip.
b) Remove the 7 mm hex-head screw
from the green ground wire and remove
the wire.
c) Remove the screw from the clamp,
open the clamp, and remove the power
cord from the unit.
Screw
Locking Tab Chassis Module
P404 P406 P403 P405
P401 P402
P409
P408
P409
P408
Clamp Screw
Power Cord
Ground Wire