REMOVING THE WATER FILL VALVES
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug dishwasher or disconnect power.
2.Turn off the water going to the dishwasher.
3.Disconnect the drain line from the dish- washer.
4.Remove the bottom dishwasher drawer (see page
5.Position the dishwasher drawer to the side, out of the way. Be careful not to stress the hoses and wiring.
6.Remove the chassis module cover (see step 6 on page
7.Remove the water inlet line from the water fill valves, then lift the valves off the hous- ing and remove the valves.
Lift
Water Inlet
Line
8.Disconnect the outlet lines from the valves.
Lower Outlet |
|
| Upper Outlet |
| |||
|
|
|
|
9.Disconnect the wire connector locking tabs from the upper and lower outlet water valve solenoid terminals, and remove the connectors.
Upper Outlet
(White Wires)
Lower Outlet
(Black Wires)
