6-2ERROR CODES
No Power To Unit
Check fuses, circuit breakers and junction
box connections.
Power To One Tub Only
1. Unplug dishwasher or disconnect power.
2. Check connections to chassis PC board,
controller and element.
3. Check resistance of power resistor; replace
if necessary.
4. Replace controller if necessary.
Loose Connections
1. Unplug dishwasher or disconnect power.
2. Check connections to machine and chassis
PC board.
Faulty EMI Filter
1. Unplug dishwasher or disconnect power.
2. Check resistance of the EMI filter (<1 Ω);
replace if necessary.
Faulty Chassis PCB
1. Unplug dishwasher or disconnect power.
2. Check connections on chassis PCB; re-
place if necessary.
WILL NOT RUN ON POWER UP
NO LED DISPLAY
MOTOR FAILURE
Motor Jammed
Free jammed rotor, check for damage to
rotor and rotor housing.
Stator Wiring Damaged
1. Unplug dishwasher or disconnect power.
2. Check stator winding resistances, replace
stator if necessary.
Hall Sensor Out Of Position
1. Unplug dishwasher or disconnect power.
2. Ensure sensor is clipped into the stator
housing properly.
Hall Sensor Connection Bad
1. Unplug dishwasher or disconnect power.
2. Check sensor connection at the electronic
controller.
Hall Sensor Failed
1. Unplug dishwasher or disconnect power.
2. Replace sensor.