Panasonic PV-GS50-K operating instructions Setting up the NetMeeting

1

2

≥If the Palmcorder is used as a Web Camera, the quality of the video to be exchanged will depend on the Internet connection status.

≥If the USB Connection Cable is disconnected from the personal computer, the WEB CAMERA mode is cancelled.

≥In the WEB CAMERA mode, video cannot be recorded onto a tape or a card.

≥If the Palmcorder is used as a Web Camera while virus checking software is running, the Palmcorder’s operation may stop midway

through. In this case, exit the NetMeeting, reconnect the Palmcorder and restart the NetMeeting.

≥When the LCD Monitor is opened and rotated frontward in the WEB CAMERA Mode, the Viewfinder becomes deactivated.

ªSetting up the NetMeeting

When starting the NetMeeting for the first time, its setup screen is displayed. (However, the screen is not displayed if the NetMeeting setup has already been done.)

1Click [Next].

2Enter the User information, carefully read the displayed contents, and then proceed.

≥Please refer to the instruction manual of your personal computer for how to configure the audio and the microphone.

≥To communicate with persons using Windows in other languages, setting up using alphabets or numbers is recommended.

3After these, without setting up anything else, please click [Next] to continue further, and the setup is completed.

≥NetMeeting is activated.

≥Please refer to the HELP file of the Windows NetMeeting for understanding its operation.

≥During set up, if [Primary video capture device] selection screen is displayed, [Panasonic DVC Web Camera] is selected.

≥Send the sound by using the microphone attached to the Personal Computer.

≥If the Palmcorder is used as a Web Camera continuously for two hours, the communication is automatically shut OFF. In this case, restart NetMeeting and set up the communication again.

72