Panasonic PV-GS50-K Lens Cap and Easy-Grip Strap, ªAdjust the Easy-Grip Strap

Before Use

1	Lens Cap and Easy-Grip Strap
	ªAttach the Lens Cap

To protect the Lens surface, attach the Lens Cap.

1Pass one end of the Lens Cap Cord through the

2	attached eye on the Lens Cap. Then pass the other
	end through the loop made by itself and pull tight.
	2 Pass the end of the Lens Cap Cord through the hole
	in the Easy-Grip Strap Attachment part and the Lens
	Cap through the Lens Cap Cord.
	≥The removed Lens Cap can be hooked onto the Easy-Grip Strap
	1. (When you are not recording, be sure to keep the Lens Cap
	attached to the Lens for protection.)
1	1
	ªAdjust the Easy-Grip Strap

Adjust the length of the Easy-Grip Strap to the size of your hand.

1Detach the tip of the Easy-Grip Strap and adjust the

length of it.

2 Reattach the tip of the Easy-Grip Strap.

2

ªTo Use as a Free Style Easy-Grip Strap

1Using the Easy-Grip Strap as the Free Style Easy-Grip Strap makes it easier to handle and carry the Palmcorder. 1 It is also convenient

when used in conbination with the MagicWire Remote Control with Narration Mic.

1 Open the Lock Cover 2 by holding tabs 3 on both

sides.

2Keep pressing on the Lock Button 4 and pull it off.

1	2		≥Hold the Palmcorder securely.
2		3	≥Close the Lock Cover 2 after pulling off.
			Slide the pad of the Easy-Grip Strap.
3
	4	4	Attach the Easy-Grip Strap around your wrist.
3		When re-attaching the Grip Belt Attachment to the Palmcorder
		1	Push until it locks with a click.
4			≥To prevent from getting unlocked accidentally, press on 5 and
			mount securely.

1

5

19