Panasonic PV-GS50-K operating instructions Playing Back, Adjusting the Sound Volume

W.B / SHUTTER / IRIS

4 MF / VOL / JOG PUSH

1		ON	MODE
		F
	O	F

1 CAMERAVCR

CARD P.B

2 SEARCH	BACK	3
	LIGHT
MAGIC	FADE	2
PIX

3

VCR Mode

Playing Back

The recorded scene can be played back immediately after recording.

1Rotate the [OFF/ON/MODE] Switch and set the

Palmcorder in the VCR Mode.

≥The [VCR] Lamp lights up. 1

2Press the [6] Button to rewind the tape.

≥Rewind the tape to the point where you want to start playback. ≥When the tape reaches the beginning, rewinding stops

automatically.

3Press the [1] Button to start playback.

To Stop Playback

Press the [∫] Button 2.

≥If a cassette recorded with copyright protection signals is played back, the screen becomes blue or mosaic-like noise patterns appear.

ªAdjusting the Sound Volume

Until the [VOLUME] Indication 3 appears, keep pressing the [PUSH] Dial 4. Then, rotate the [PUSH] Dial to adjust the volume. After the adjustment, press the [PUSH] Dial to make the [VOLUME] Indication disappear.

To adjust the volume with the Remote Controller, press the [T] or [W] Button to display the [VOLUME] Indication. Press the [T] Button to increase the volume or press the [W] Button to decrease the volume. The [VOLUME] Indication goes off 2 or 3 seconds after the adjustment is finished.

≥When the Playback Zoom Function is in use, the sound volume cannot be adjusted.

≥For other notes, see page 88.

42