ªManual Shutter Speed Adjustment

(l36)

You may see vertical lines of light in the playback image of a brightly shining subject or highly reflective subject.

During Normal Playback, transition from one scene to another may not appear smooth.

Because the color and brightness of the playback image may become unstable, avoid recording under fluorescent light, mercury light, or sodium light.

If you are using either Gain up Mode, Program AE Mode or MagicPix Function, you cannot adjust the shutter speed. If the shutter speed is adjusted manually, this setting will be cancelled.

ªManual Iris Adjustment (l36)

Depending on zoom magnification, the iris value may not be displayed correctly.

If you are using Program AE Mode you cannot adjust the iris.

If you attempt to adjust the Shutter Speed after setting the Iris, the value set for the Iris will be cancelled.

ªWhite Balance (l37)

In the following cases, you cannot change White Balance:

When you set [EFFECT1] of [DIGITAL EFFECT] Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu to [GAIN UP] or [EFFECT2] to [SEPIA] or to [B/W].

When you set the Zoom to 10k or higher. During Digital Still Picture Mode.

When you display a Menu. When you use the MagicPix.

In the following cases, the [1] indication flashes:

The flashing indicates that the previously adjusted White Balance setting is still kept. This setting will be kept until White Balance is adjusted again.

You may not be able to achieve correct White Balance adjustment manually under weak illumination.

Others

ªDigital Effect Functions

(Camera Mode) (l39)

It is not possible to use [MULTI], [P-IN-P], [WIPE], [MIX] or [TRAIL] of [EFFECT1] together with the digital modes of [EFFECT2] on the

[DIGITAL EFFECT] Sub-Menu.

If you set [EFFECT1] on [DIGITAL EFFECT] Sub-Menu to [GAIN UP], you need to adjust the focus manually. However, you cannot adjust the

shutter speed and cannot select White Balance. You cannot use Sports Mode, Portrait Mode or

Low Light Mode with Gain up Mode [GAIN UP].

If [EFFECT2] on the [DIGITAL EFFECT] Sub-Menu is set to [B/W] or [SEPIA], the selected White Balance Mode cannot be changed.

Setting the Cinema Mode cancels the Picture-in Picture Mode and the Multi-Picture Mode.

In the following cases, using the [EFFECT1] on the [DIGITAL EFFECT] Sub-Menu is not possible.

When [PROGRESSIVE] is set to [ON] When the MagicPix Mode is set

In the following cases, using the Digital Effect Function is not possible.

Card Mode

Title In

Wipe Mode and Mix Mode (l40)

If either one of the following operations is carried out, stored images will be erased, and Wipe and Mix Functions cannot be used.

Use the Camera Search Function Press the [STILL] Button

Switch the [TAPE/CARD/CARD MODE] Selector. P-IN-P Mode (l40)

If the Palmcorder power is turned off, the smaller

picture will disappear.

A title cannot be inserted into the smaller picture. Multi-Picture Mode (l41)

When [PROGRESSIVE] on the [CAMERA SETUP] Sub-Menu is [ON], Multi-Picture Mode cannot be used.

If the [MULTI] Button is pressed while self-recording Mirror mode (l29) is used, the still picture is displayed from the upper right corner of the screen, but, in reality, the picture is recorded

from the upper left corner as usual.

The quality of images recorded in Multi Mode deteriorates slightly.

Multi Mode cannot be used in still picture mode. The top and bottom of the Multi pictures will be cut

off slightly.

87

Page 87
Image 87
Panasonic PV-GS50-K Manual Shutter Speed Adjustment, Manual Iris Adjustment l36, White Balance l37