Panasonic PV-GS50-K To Check the Recording, To View the recorded scene while the Recording

Models: PV-GS50 PV-GS50-K

1 220
Download 220 pages 13.57 Kb
Page 28
Image 28

2

5TAPE CARD CARD

MODE

AUTO

MANUAL

FOCUS

 

 

ON

MODE

3,

 

F

 

O

F

 

 

 

 

4

1

 

1 CAMERA

VCR

CARD PB

3

6

7

SEARCH

SEARCH

2

REC

RECORD

4

PAUSE

PAUSE

CAMERA Mode

Recording

1Set the [OFF/ON/MODE] Switch to [ON].

The [CAMERA] Lamp lights up. 1

2Slide the [TAPE/CARD/CARD MODE] Selector towards [TAPE].

3Press the Recording Start/Stop Button.

Recording starts.

After the [RECORD] indicator is displayed, it changes to

[REC]. 2

The Rec Lamp (LED Lamp) 3 lights up during recording and alerts those being recorded that recording is in progress. The Rec Lamp does not light up if the [REC LAMP] on the [OTHER FUNCTIONS1] Sub-menu is set to [OFF].

4Press the Recording Start/Stop Button again to

pause the recording.

[PAUSE] is displayed. 4

If the Recording Pause Mode continues for more than

5 minutes, the power is turned off automatically for tape protection and power conservation. To resume recording from this condition, turn on the power again.

When recording while the Mode Selector Switch is set to [AUTO] 5, the Palmcorder automatically adjusts the focus and white balance. (In some cases, they cannot be adjusted automatically and need to be adjusted manually.) (l37)

Before turning on the power, remove the Lens Cap. If the Lens

Cap is still attached when the power is turned on, Automatic White Balance Adjustment may not function correctly. (l37)

ªTo Check the Recording

By pressing the [S] Button 6 in the Recording Pause Mode, you can play back the last few seconds of the recorded scene.

[CHK] is displayed. After checking, the Palmcorder resumes the Recording Pause Mode.

For other notes, see page 84.

ªTo View the recorded scene while the Recording

is paused (Camera Search)

The recorded scene can be viewed by holding down the [SEARCHj] Button 6 or [SEARCHi] Button 7 in the Recording Pause Mode.

The Camera Search Function is useful for finding the starting point of a new scene to create a smooth transition from one scene to another.

When the [SEARCHj] Button is pressed, images are played back in the reverse direction.

When the [SEARCHi] Button is pressed, images are played back in the forward direction.

For other notes, see page 85.

ªTo Finish the Recording

Set the [OFF/ON/MODE] Switch to [OFF].

28

Page 28
Image 28
Panasonic PV-GS50-K To Check the Recording, To View the recorded scene while the Recording, To Finish the Recording