Panasonic PV-GS50-K No Cassette is inserted. l20, Tape ended during recording

[INITIAL SET] >> [YES]. ≥The initializing takes a while.

≥After the initializing is completed, the

[COMPLETED] Indication appears with beeps. NO CARD:

≥Initializing will not erase the clock setting that PLEASE WAIT: has been adjusted.

~~~~~~~~~~~~~~~~

Warning/Alarm Indications

Set [CAMERA FUNCTIONS] >> [OTHER FUNCTIONS 2] >>

1

ªChanging the Counter Display Mode

By changing [C.DISPLAY] on the

[DISPLAY SETUP] Sub-Menu, you can change the Counter Display Mode to Tape Counter Indication (0:00.00), Memory Counter Indication (M0:00.00), and Time Code Indication (0h00m00s00f).

≥You can also press the [COUNTER] Button of the Remote Controller repeatedly to change the Counter Indication.

ªDisplaying Date/Time Indication

To display Date/Time Indication, set the appropriate Date/Time in [DATE/TIME] on the

[DISPLAY SETUP] Sub-Menu.

≥You can also press the [DATE/TIME] Button on the Remote Controller repeatedly to display or change the Date/Time Indication.

ªChanging the Display Mode

By changing [DISPLAY] on the [DISPLAY SETUP] Sub-Menu, Counter Display Mode changes to All Function Display, Partial Display, and Minimum Display.

~~~~~~~~~~~~~~~~

Initializing the Modes

You can change the Menu settings back to the shipping condition.

If any one of the following indications lights up or flashes, please check the condition of the Palmcorder.

EJECT TAPE: After the [DEW DETECTED] Indication appears, eject the Cassette.

YCHECK REC TAB:

The erasure prevention tab on the inserted Cassette is open (that is, set to [SAVE]).

When you are attempting to do audio dubbing on the unrecorded (blank) portion of the tape, or you are attempting to do dubbing on the Cassette whose tab is set at [SAVE]. (l50, 67)

Others

YTAPE NOT INSERTED:

No Cassette is inserted. (l20)

XLOW BATTERY MODE:

The Battery is low. Recharge it. (l18)

0:The internal lithium battery is low. (l27)

2END/TAPE END:

The tape ended during recording.

REMOTE/

CHECK REMOTE MODE:

Wrong Remote Controller Mode has been selected. (l17)

CANNOT REC LP-MODE:

Because the original recording was done in LP Mode, audio dubbing cannot be performed. (l50)

INCOMPATIBLE DATA:

This Cassette is incompatible or contains copy-guard.

Because the medium is protected by a copy guard, images cannot be recorded correctly.

°:If this Indication appears, return the LCD Monitor to the original position in order to check the specific content of the Warning/Alarm Indication.

AV INPUT RECORDING:

When you are attempting to record on the Memory Card during dubbing (l66) on the Cassette.

There is no Memory Card inserted.

When reading of the Memory Card (playback, format, when using the Multi-Picture Function). (l56, 65)

CARD ERROR:

The Memory Card is not compatible with the Palmcorder.

CHECK SELECT SWITCH:

You are attempting to record a tape in VCR Mode, with the combination of modes set with the [TAPE/CARD/ CARD MODE] Selector, this Indication appears. Pressing the Recording Start/Stop Button with [PICTURE] in Camera Mode. Pressing the PhotoShot Button with [MPEG4] or [VOICE] in Camera Mode. Pressing the Recording Start/Stop Button with [TAPE] and [PICTURE] in Card Playback Mode. Pressing the PhotoShot Button with [PICTURE] in Card Playback Mode.

83