FILE LOCKED: When you are attempting to delete a locked picture. The locked picture cannot be deleted.

WRITE PROTECTED:

When you are attempting to write the data on an SD Memory Card whose write protection switch is set at [LOCK].

NO PICTURE: There are no pictures in the Memory Card.

NO MPEG4 DATA:

There are no moving pictures in the Memory Card.

NO VOICE DATA:

There is no voice data in the Memory Card.

NO TITLE: There are no titles in the Memory Card.

NO SPACE LEFT:

Card does not have sufficient memory remaining.

Select Card Mode and delete unnecessary files.

t:You are attempting to play back data which is not compatible with this Palmcorder. (l56)

DEW DETECTED:

Condensation has occurred. (l93)

:NEED HEAD CLEANING:

The video heads are dirty. (l93)

PUSH THE RESET SWITCH:

Irregular mechanism is detected. Press the [RESET] Button.This may solve the problem.

You are attempting to record to a Memory Card formatted with other equipment (like a Personal Computer). Format the Memory Card with this equipment.

NEEDS TO BE SERVICED:

Disconnect the power supply and request service.

CONNECT USB CABLE:

The [WEB CAMERA] Button is pressed with USB Cable unconnected. Connect the USB Cable to the Palmcorder and the Personal Computer.

DISCONNECT USB CABLE:

You are pressing the Recording Start/Stop Button, the [PHOTO SHOT] Button or the [TITLE] Button in the WEB CAMERA Mode. You are pressing the [TITLE] Button in Camera Mode or VCR Mode with a USB Cable connected. You are attempting to record on a Card with a USB Cable connected.

CANCEL WEB CAMERA MODE:

It is not possible to operate the [OFF/ON/MODE] Switch in the WEB CAMERA Mode.

~~~~~~~~~~~~~~~~

Notes & Precautions

ªAlarm Sounds (l24)

When [BEEP SOUND] on the

[OTHER FUNCTIONS] Sub-Menu on the [CAMERA FUNCTIONS] Main-Menu is set to [ON], confirmation/alarm beeps are issued as follows.

1 Beep

When you start recording

When you switch the [OFF/ON/MODE] Switch from [OFF] to [ON]

2 Beeps

When you pause recording 2 Beeps for 4 times

If you perform a wrong operation before or during recording

ªInserting/Ejecting the Cassette (l20)

In the case of using a previously recorded Cassette, you can use the Camera Search Function to find the position where you want to continue recording.

If a new Cassette is inserted, rewind to the beginning of the tape before starting to record.

When inserting the cassette, make sure it faces in the right direction and then push it in until it stops.

When the Cassette Holder is in action, do not touch anything except the [PUSH CLOSE] Button.

When closing the Cassette Compartment Cover, do not get anything caught in the cover, such as a cable of an optional stereo microphone.

ªRecording Check (l28)

For recording check, the Palmcorder must be the same as the recording speed Modes (SP/LP) used for the recording. Otherwise the playback images will be distorted.

84

Page 84
Image 84
Panasonic PV-GS50-K operating instructions Alarm Sounds l24, Inserting/Ejecting the Cassette l20, Recording Check l28