Motorola TLKR T8 owner manual PTT Roger tone, Automatic Power Save Feature, Auto Power Off

		set the Key tone to OFF.
	2.	Press OK to confirm the setting.
English	PTT (Roger tone)
	heard through the speaker when Key Beep is On. It is
	Roger Beep is a BEEP that is sent to notify the end of
	transmission (PTT and VOX transmission). Roger can be
	transmitted even if Key beep is turned Off. However, Roger
	Beep will not be heard from the speaker.
	To turn the PTT beep ON:
	1.	Enter the MENU/GRP. Advance through the Menu until
		the "PTT" display. Press OK then press the	or key
		to set the PTT Beep tone to ON mode.
	2.	Press OK to confirm the setting.
	To turn the PTT beep OFF:
	1.	Enter the MENU/GRP. Advance through the Menu until
		"PTT" display. Press OK then press the or	key to
		set the PTT tone to OFF.

2.Press OK to confirm the setting.

Automatic Power Save Feature

Your radio has a unique circuit designed to dramatically extended the life of the batteries. If there is no transmission or an incoming call within 3 seconds, your radio switches to the Power Save Mode. The radio is still able to receive transmissions in this mode.

Auto Power Off

Auto Power Off feature allows you to set the time that the radio turns off automatically.

12	1. Enter the MENU/GRP. Advance through the Menu until
	the"PWR"display. Press OK then press the or key

to select the Auto power off mode. Selection mode can be set to On, 1hr, 2hr or 3 hr.

2.Press OK to confirm the setting.

Room Monitor Feature

You can use one of your TLKR T8 radios as a room monitor and use the other radio to listen to and keep a check on the voice in another room. When you set the room monitor feature, the monitoring radio will detect voice/noises (according to the sensitivity level you set) and transmit back to the listening radio without pushing the PTT key. The monitoring radio is not able to receive any transmissions in this mode.

To turn the Room Monitor ON:

1.Enter the MENU/GRP. Advance through the Menu until the "ROOM" display. Press OK then press the or key to select the Room monitor to Off or level L1, L2, L3, L4, L5.

2.Channel monitoring will start immediately.

To set the Room Monitor OFF:

1.Enter the MENU/GRP. Advance through the Menu until the "ROOM" display. Press OK then press the or key to set the Room monitor to Off.

2.Press OK to confirm the setting.

Note:

-Pressing the PTT key in Room Monitor mode is invalid and the radio emits PTT Error tone.

-When the voice/noise in another room continues more than 60 seconds, the monitoring radio stops monitoring for 5 seconds, and then resumes.