
English
Dual Watch Mode | Stopwatch Activation |
| |||
Your radio can scan the current channel and another | You can use this radio as a Stopwatch timer. It can time up | ||||
channel alternately. You need to set a channel number and | to 60 minutes and 59 seconds. | ||||
its | Note: You can receive incoming signals during this mode. | ||||
To set another channel and start Dual Watch: | To use the Stopwatch Timer |
| |||
1. Enter the CH/ . Advance through the select menu until |
| ||||
1. Press and hold the CH/ | key until Stopwatch timer | ||||
"2CH" display. | |||||
displays. |
| ||||
|
|
|
|
2.Press OK then press the or
key to set the dual channel to ON monitoring. Press OK again to set the dual watch channel number.
3.Press the key to set the second channel number, press OK then press the
or
key to select second channel. Press OK again to confirm.
4.Press the key to set the second
or
key to select second
Note: If you set the same channel number and
To turn the Dual Watch mode OFF:
Enter the CH/ . Advance through the select Menu until "2CH" display. Press OK then press the
or
key to set to OFF mode.
Press OK to confirm the setting.
2.Press the key to start Stopwatch timer. Pressing the
key again will Pause the timer.
3.Press the key to reset the Stopwatch timer.
4.Press and hold the CH/ key to exit the Stopwatch timer function.
8