Motorola TLKR T8 Set All/Direct Call, Status Auto Channel Change setting, Set All Call

English

Press the CH/			key to enter the channel setting. Press				Manual Channel setting
OK then press the					or	key to select the Auto Channel	Press the CH/	key to enter Group Mode. Press OK to
Change settings or Manual Channel Change settings.
							set the Manual Channel setting and the				display will show
The Display shows the following:
							"MY".
							Press OK then press the			key to select the
									or
							channel.
							Then, Manual channel setting is available.
							Note:Pressing the CH/		key will go back to idle
	Auto Channel					Manual Channel	status.
	Change					Change	Set All/Direct Call
							Press the /	key in Group mode to enter All/Direct call
Press the CH/			key to enter each setting.				setting. At first the user selects a type of call from All Call
							transmission or Direct Call setting.
Note:Pressing the CH/						key will go back to idle
	status.
Auto Channel Change setting
Press the CH/			key		to enter Group Mode.
Press OK to set the Auto Channel change and the display							All Call			Direct Call
will show the current group number. Press OK then press							Transmission			Transmission
the	or	key to select the group channel number press
again the		or		key to select the group mode in "ALL".
							To select the setting, press the			or	key to select the
Press OK to confirm and transmit Auto Channel change
							type of a call.
command.
							Set All Call
Note:Pressing CH/					key will go back to idle status.
							When All Call Transmission " ZYNC" is selected press the
							/ key to transmit All Call immediately. Then it sounds
							All Call tone to the receiver unit. The display shows TX icon
							and Call icon while transmitting.
							Note:Pressing the CH/		key will go back to idle status.

16