Motorola TLKR T8 Channel Scan Feature, Monitor Mode Feature, Voice Operated Transmission

English

10

Channel Scan Feature

Your TLKR T8 radio has a channel scan feature that allows you to easily scan all 8 channels. When an active channel is detected, the radio will pause on that channel until the channel is clear. Then after a 2 second pause, the radio will continue scanning. Pressing the PTT key while the scan is paused on a channel will allow you to transmit on that channel and after releasing the PTT in 5 seconds it will continue scanning.

To set the channel scan ON:

1.Enter the MENU/GRP. Advance through the Menu until "SCAN" display. Press OK then press the or key to set the Scan On.

2.Press OK to start channel scanning.

To set the channel Scan OFF:

1.Enter the MENU/GRP. Advance through the Menu until "SCAN" display. Press OK then press the or key to set the Scan to OFF.

2.Press OK to confirm the setting.

Monitor Mode Feature

Your TLKR T8 radio allows you to listen for weak signals on the current channel at the press of a key. To set the Monitor to ON:

1.Enter the MENU/GRP. Advance through the Menu until the "MON" display. Press OK then press the or key to set the Monitor ON.

2.Channel monitoring will start immediately.

To set the Monitor to OFF:

1. Enter the MENU/GRP. Advance through the Menu until

"MON" display. Press OK then press the or key to set the monitoring to OFF mode.

2.Press OK to confirm the setting.

Voice Operated Transmission

Your TLKR T8 radio is equipped with a user selectable Voice Operated Transmitter (VOX) that can be used for automatic voice transmission. The VOX feature is designed for hands-free purpose. Transmission is initiated by speaking into the microphone of the radio or headset (headset is not included) instead of pushing the PTT key.

To select the VOX level:

1.Enter the MENU/GRP. Advance through the Menu until the "VOX" display. Press OK to select VOX level settings to (L1..L5/Off). Setting Off disables VOX, while level 1-5 set the sensitivity of the VOX circuit.

2.Press the or key to select the desired VOX sensitivity level. Use Level 1 in quiet environments, and use level 5 in very noisy environments. You can find the

appropriate sensitivity level by speaking into the microphone. If the icon flashes, your voice is accepted.

3.Press OK to confirm the setting.

Note:When you continue to transmit using VOX function for 60 seconds, the radio emits TX Time Out tone and the icon flashes for 5 seconds.

Transmitting a Ring Tone

Your TLKR T8 radio is equipped with 10 selectable call tones that will be transmitted, when the / key is pressed.