Motorola TLKR T8 owner manual Set ID Name, Set ID number, Set Monitor in Group mode

English

Set ID Name

ID name appears on other units’ displays when you make an All Call or Direct Call. This is also the name that appears on other radio displays when someone wants to make a Direct Call to you. When no ID name is set, the unit number appears.

To set the ID Name:

1.Enter the MENU/GRP. Advance through the Menu until "NAME" is displayed. Press OK to enter the Name on the blinking sub-code segments.

2.Press the or key to input the character on the blinking sub code segments. Press OK to move to the next character until completed the desired characters. The name characters can be selected up to 4 characters.

3.Press OK to confirm the setting.

Note:Whenever the user presses MENU/GRP key, the unit cancels input ID number and entered ID name then it exits from Group menu.

Set ID number

Each radio in your group needs to be set to an ID number from 1 to 16.

The ID number is required to distinguish units of the same Group.

To set the ID number:

1.Enter the MENU/GRP. Advance through the Menu until "ID" is displayed. Press OK then press the or key to set the ID number.

2.Press OK to confirm the setting.

Note:The user selects ID number that is displayed on channel segments by pressing the or key. When the registered ID of All Call is selected by pressing or the LCD indicates "USED" at sub-code segments, and if non registered ID is selected it indicates nothing at sub-code segments.

Set Monitor in Group mode

To set the Monitor mode ON:

1.Enter the MENU/GRP. Advance through the Menu until the "MON" display. Press OK then press the or key to set the Monitor to ON mode.

2.Channel monitoring will start immediately.

To set the Monitor to OFF:

1.Enter the MENU/GRP. Advance through the Menu until "MON" display. Press OK then press the or key to set the Monitor to OFF.

2.Press OK to confirm the setting.

14