Replacing the Cavity Light Bulb, Service | Hobart HM1200 instruction

MAINTENANCE

REPLACING THE CAVITY LIGHT BULB

If the Cavity Light Bulb burns out, you can replace it yourself.

CAVITY LIGHT COVER

WARNING: UNPLUG ELECTRICAL POWER CORD BEFORE PERFORMING ANY CLEANING OR MAINTENANCE.

•Unscrew the screw on the Cavity Light Cover located on the left side of the cabinet (Fig. 7).

•Replace the old bulb with a new 115 – 125 V, 20 W bulb. Use same size and type.

•Replace the Cavity Light Cover (turn screw until snug).

Fig. 7

TROUBLESHOOTING

FAILURE CODES	POSSIBLE CAUSE	SUGGESTED ACTION

	Overcooked food.	Unplug oven to stop beep. Wait for oven to cool
	Overcooked food.	and reset. If food ignites, do not open door.
F01	Exhaust air temperature too	and reset. If food ignites, do not open door.
F01	Exhaust air temperature too	If normal operation does not resume, contact
	high.	If normal operation does not resume, contact
	high.	service and report the Failure Code number.
		service and report the Failure Code number.

F05, F33, F34, F44,		Unplug. Wait at least 1 minute. Reconnect.
F05, F33, F34, F44,	Problem with circuit.	If normal operation does not resume, contact
F81, F82, F86, F87	Problem with circuit.	If normal operation does not resume, contact
F81, F82, F86, F87		service and report the Failure Code number.
		service and report the Failure Code number.

NOTE: The above codes do not indicate all the possible failures.

SERVICE

Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment. Service contracts are available on this and other Hobart products.

FORM 34726 (Nov. 2001)

– 16 –

PRINTED IN U.S.A.

MAINTENANCE