Hobart V1401, M802 manual Transmission, Bowl Lift, Adjustments, Bowl Clamps

Page 14

Transmission

The transmission oil should be even with the line on the Oil Level Gauge when the motor is NOT running. If the oil falls below this line, DISCONNECT ELECTRICAL POWER SUPPLY and remove the Top Cover, which is secured by two screws. Remove the Transmission Fill Plug (Fig. 6) and add a small amount of the recommended transmission oil until it returns to the proper level. DO NOT overfill the transmission — leakage may result. Contact your local Hobart Service Office for the recommended transmission oil.

Fig. 6

Bowl Lift

The bowl clamp area of the bowl support, the slideways and lift screw should be lubricated two or three times per year, depending on use. To reach these areas, loosen the thumb screws securing the apron and remove the apron. Remove the inner apron by removing its screws.

The slideways and lift screw (Fig. 5) should be lubricated approximately twice a year. To reach these areas, fully lower the bowl support and remove the apron, which is secured by four thumb screws. Wipe a thin coat of Lubriplate 630AA (supplied) on the bowl clamp area of the bowl supports, each slideway and the lift screw.

Replace the apron.

ADJUSTMENTS

Bowl Clamps

The height of the bowl clamp is controlled by a spring washer and lock nut, which are located on the bottom of the bowl support. Turning the lock nut clockwise will loosen the clamp, turning the lock nut counterclockwise will tighten the clamp. If repeated adjustments are necessary, additional service is indicated. Contact your local Hobart Service Office.

– 14 –

Page 13 Page 15
Image 14
Page 13 Page 15
Contents M802 & V1401 Mixers Model M802 Mixer Model V1401 Mixer General Location InstallationUnpacking Check Lubrication Before UseCheck Rotation Three-Phase Machines Only Electrical ConnectionsELECTRO-MECHANICAL Timer Controls when equipped OperationFor Continuous Mixing Programmable Timer Controller when equippedUsing the Dial Timer to Set the Mixing Time 0100 0100 Mixing Power Bowl LiftChanging Speeds BowlTo Reinstall the Wire Cage Assembly To Rotate the Wire Cage Assembly to the RearTo Remove the Wire Cage Assembly for Cleaning Bowl Guard FigBowl Scraper Attachment CleaningMixer Speeds Planetary MaintenanceLubrication Planetary SealBowl Lift AdjustmentsTransmission Bowl ClampsTo Measure the Clearance To Adjust Bowl / Agitator ClearanceAgitator Clearance Service TroubleshootingSymptoms Possible Causes

M802, V1401 specifications

The Hobart V1401 and M802 are two remarkable additions to the world of commercial cooking equipment, designed to meet the high standards of modern culinary operations. Both units reflect Hobart's commitment to innovation and efficiency, making them popular choices among chefs and restaurant owners.

The Hobart V1401 is a robust slicer that features a powerful 1/2-horsepower motor, allowing for seamless slicing of various food products, from meats to cheeses. This model is equipped with a precision-engineered, 14-inch stainless steel blade that delivers clean and consistent cuts, ensuring that food presentation remains impeccable. The V1401 offers adjustable slice thickness settings, enabling chefs to tailor their cuts to specific recipes or serving preferences. Its durable construction is further enhanced by a safety interlock system that protects users during operation, ensuring compliance with strict safety standards.

On the other hand, the Hobart M802 mixer stands as a testament to reliability and performance in commercial kitchens. With a capacity of 80 quarts, this mixer is ideal for high-volume production environments. It features a powerful 2 horsepower motor that can handle even the toughest doughs and batters with ease. The M802 comes with a three-speed transmission, providing versatility for a range of mixing tasks, from mixing dough to whipping cream.

One of the standout features of the M802 is its stainless steel bowl, which is not only durable but also easy to clean, promoting better hygiene practices in the kitchen. The mixer is equipped with a safety guard that ensures safe operation while minimizing the risk of accidents. Additionally, the M802 offers a variety of optional attachments, including dough hooks, whips, and paddles, enhancing its functionality and making it an invaluable asset for any culinary operation.

Both the Hobart V1401 and M802 exemplify advanced engineering, combining efficiency, safety, and ease of use. Their durable designs ensure reliability under constant use, while their features cater to the specific needs of commercial kitchens. Ideal for restaurants, bakeries, and catering services, these Hobart products are synonymous with quality and performance, making them essential tools for professionals striving for culinary excellence. Investing in these machines not only streamlines kitchen processes but also enhances the overall productivity and output of culinary establishments. With Hobart's legacy of dependability, these models are poised to support chefs in creating exceptional culinary experiences.
Top Page Image Contents