Nuvo NV-E6GMS, NV-E6GXS manual Edit Zone Properties Fig

Page 22

Fig. 24

5.1 Edit Zone Properties (Fig. 25)

Double-clicking on a zone number opens the “Edit Zone Properties” window. Specific properties defining that zone are set here.

Max Volume: This allows the volume in a zone to be limited. This can be done either to avoid damage to low-power speakers or simply to prevent a certain room from being turned up too high (e.g., a teenager's bedroom).

Party Volume: This controls the reset volume level for each zone when the All On/Party Mode is initiated from any of the Control Pads. The range is –78dB to –30dB.

Page Volume: If you are using the paging feature of the Essentia System, you can also set the specific volume level of the page zone by zone, by using this volume control. The range is –78dB to –30dB, with a default at –40dB.

Balance: The level of output to the left and right speakers is adjusted here. The default is center, but depending on the location of the speakers and the optimal listening area of the room, it may be advantageous to adjust the balance to either the left or the right. Keep in mind that this setting can be made and adjusted from within the Zone Setup menu at the Control Pads.

Bass and Treble: Both bass and treble can be adjusted individually on a zone by zone basis. The EQ sweep is -18dB to +18dB. Keep in mind that these levels can also be set at the zone Setup menu at the Control Pads with music playing. This will be covered later in the Control Pad menus.

Volume Reset at Zone ON: A zone-specific feature is the ability to have a zone automatically reset to a low volume level when the zone is turned on. This check box initiates that feature and is tied to the Zone Reset Volume level set above it. If this box is not checked, the zone will turn on at the last volume level.

Loudness Compensation ON: This box defaults to checked and enables an automatic bass and treble boost when the zone is at a low listening level. This EQ gradually flattens out as the zone volume is increased. Deselecting the box turns this function off.

Exclusive Source Control: Checking this box gives this zone exclusive “do not disturb” control of any chosen source. Other zones will have the ability to listen to that source, but they will not have any specific function control.

IR Pass-through:Each zone Control Pad has an IR receiver for wireless remote control. By its nature, IR is susceptible to external interference. To account for this, there is specific IR pass-through settings for each Control Pad. IR Disabled turns off the IR receiver completely and eliminates any possibility of a competing light source. This is useful in an environment in which the Control Pad receiver is competing with overwhelming sunlight. This will prevent IR communication throughout the system and therefore, it is better to eliminate that light source. IR No Pass-throughprevents third-party remote control commands from being accepted, but still allows the NuVo NV-GRC1 remote control to operate the system. In some zones this is necessary when a third-party remote is often used to control a non–NuVo System source such as a TV. This would eliminate that remote control's commands from being received by the Control Pad and passed through to the source equipment.

19

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Essentia Page English French Table of Contents Introduction Essentia Back Panel Essentia Control Pad NV-GRC1 Remote Control Installing the Essentia System in Your Home Step-by-Step Crimping InstructionsIII. Installing the Essentia Amplifier II. Terminating the Speaker Wire FigIV. Installing the NV-E6GMAP-DC Allport Fig VI. Attaching Audio Source Equipment Fig Using the Fixed and Variable LineoutsSetting up NuVo Sources for use with NuVoNet T2G AM/FM and XM TunersNuVoDock for iPod NuVo T2G Tuner Direct Numeric Access FigT2G Tuner IR Input VII. Expanding Essentia to 12 Zones Fig Essentia G MainRetrieve Configuration from Essentia IX. Using the Essentia Configurator SoftwareOpen or Create Essentia Configurator File fig Main Startup FigAdding a New Component to the IR Library Fig Using the IR Learning Station Interface FigRecording IR codes Fig IR Library Default Key Assignment Fig Adding a Function Code Fig Cleaning Up an IR LibraryIR Library Test Fig Defining SourcesAdding a NuVoNet Source Fig Select or Edit Source FigWith NuvoNet, pg Macros Fig Creating a Macro Preset String Fig Edit Macro Definition FigRe-Ordering Macro Codes Macros updatedEditing Codes in a Macro Fig Control MacrosEdit Zone Properties Fig Page External Mute System Mute Trigger Fig Zones updated FigSystem Settings External Mute Paging Trigger FigUpdate System Fig 24 Hour Time Display and Power Off ModeSerial Delay Fig Control Pad Firmware Update aPlease note that if multiple Control Pads are plugged ProcessMain Menu Play All M3 Options Adv. Zone Control XI. Using the Control Pads Menu ButtonMain Menu Favorites Sources Adv. Zone Control Reprogramming the Zone AddressSources Satellite NuVo M3 a NuVo M3 B Adv. Zone Control Party Mode Do-Not-Distrub SleepSleep Off Minutes Lock Code? 3485 Setup Favorites #1-12 Zone SettingsZone Settings Balance Bass Treble Favorites #1-12 Rock Jazz EmptyAdv. Zone Settings Source Lockout Exclusive Src. C Group Initial Volume Set current volu Reset -60 dBDefault DND No Mute No Party System Settings Date/Time Hour Time Dis Power-Off Mode Cur. Source Setting Gain NuVoNet SourcSlaved To Zone None Kitchen Dining Room Advanced Ext. Mute/Page Serial Delay Sources Zone Power-Off MMute/Off w/Menu Off/All-Off Menu XII. Essentia Accessories NV-I8DLS IR Learning Station InterfaceCapturing IR codes using the IR Learning Station Interface NV-MI1 Mute Interface Adaptor Fig RoHSNV-LSI24 Local Source Interrupt Fig Fixed VAR Trig IR Outputs StatusNV-LSA40 Local Source Amplifier Fig NuVo System zone speakersLSA40 Back NV-LSA40PD Local Source Power Distribution Hub FigBack LSA40PD Front NV-P2100 200-Watt Auxiliary Amplifier Fig RS232 InterfaceEssentia Specifications Troubleshooting Symptom Probable Cause Page NuVo Technologies LLC Hebron, Kentucky USA

NV-E6GXS, NV-E6GMS specifications

The Nuvo NV-E6GXS and NV-E6GMS are advanced digital signage media players designed for a wide array of applications, including retail, corporate environments, and educational institutions. These devices stand out due to their powerful hardware, robust features, and versatile software capabilities, which make them ideal for displaying dynamic content in a variety of settings.

At the heart of the Nuvo NV-E6GXS and NV-E6GMS lies a high-performance processor that ensures smooth playback of high-resolution multimedia content. Both models are equipped with support for 4K resolution, allowing users to create visually stunning displays that can captivate audiences. The ability to handle multiple video formats and high-definition graphics makes these players suitable for intricate presentations, advertising campaigns, and immersive experiences.

One of the standout features of the Nuvo players is their extensive storage capacity. With options for SSD and HDD integration, users can store large libraries of media content directly on the device. This means that even large installations can be managed efficiently without the need for constant external data access. The compact size of the players also allows for easy placement in various environments without taking up excessive space.

Connectivity is another key area where the Nuvo NV-E6GXS and NV-E6GMS shine. They come with an array of ports, including HDMI, USB, and Ethernet, facilitating seamless integration into existing digital signage ecosystems. The players support both wired and wireless networking options, enabling flexible content updates and remote management capabilities. This ensures that users can quickly change displays, update content, or troubleshoot issues from anywhere.

Further enhancing their functionality, the Nuvo media players come pre-installed with versatile software for content management and scheduling. Users can easily create playlists, schedule content to play at specific times, and even manage multiple displays from a single interface. The intuitive user interface simplifies the overall operation, making it accessible even for those with limited technical expertise.

In terms of durability, the Nuvo NV-E6GXS and NV-E6GMS are built to withstand demanding environments. Their fanless design ensures quiet operation, making them an excellent choice for noise-sensitive applications. With thermal management technologies, these devices maintain optimal performance even during prolonged usage, which is essential for installations intended for continuous operation.

In conclusion, the Nuvo NV-E6GXS and NV-E6GMS are powerful digital signage solutions that combine high-performance hardware with versatile software capabilities. Their support for 4K content, extensive connectivity options, and robust management features make them suitable for a broad range of applications, meeting diverse needs while delivering outstanding performance. Whether for advertising, information dissemination, or educational purposes, these media players offer an effective way to engage audiences and enhance communication.
Top Page Image Contents