MAINTENANCE
WARNING: DISCONNECT ELECTRICAL POWER AND PLACE A TAG AT THE DISCONNECT SWITCH INDICATING THAT YOU ARE WORKING ON THE CIRCUIT BEFORE BEGINNING ANY MAINTENANCE PROCEDURE.
LUBRICATION
The motor has permanently lubricated ball bearings and requires no additional lubrication.
CHANGING SAW BLADES
If changing saw blades, disassemble components as described in REMOVING THE BLADE, page 5, and the instructions for any component throughout the manual. Make sure wipers and all other components are properly reassembled. Refer to BLADE TENSION ADJUSTMENT and ADJUSTING THE BLADE
SERVICE
Contact your local Hobart Service Office for any repairs or adjustments needed on this equipment.
FORM 19465 | – 10 – | PRINTED IN U.S.A. |