Bowl Guard Fig | Hobart ML

Bowl Guard (Fig. 5)

The Wire Cage Assembly on the Bowl Guard can be rotated out-of-the-way to add ingredients or access the bowl and agitator.

To rotate the Wire Cage Assembly to the rear . . .

Push the Latch in to release the Centering Pin from the Centering Ramp. Note how the grooves on the nylon Retainers allow the Wire Cage to ride around the circular Ridge of the planetary Drip Cup. The Wire Cage can rotate 360°; left or right. When the Wire Cage returns to the front and center position, the Centering Pin is captured and held by the Centering Ramp, restricting rotation of the Wire Cage until the Latch is pressed again.

The Wire Cage must be in the front-center position for the mixer to operate.

To remove the Wire Cage Assembly for cleaning . . .

Lower the Bowl. Rotate the Wire Cage to the rear. Remove both Agitator and Bowl. Return the Wire Cage to the front.

While holding the Wire Cage securely with both hands, use your thumb to push down on the Black Release Knob. Lower and remove the Wire Cage. Wash it in a sink or dishwasher; rinse with clear water; and dry with a clean cloth.

The stainless steel Splash Guard can be wiped-off or washed easily with a cloth or sponge and warm soapy water. Rinse with clear water. Dry with a clean cloth.

To reinstall the Wire Cage Assembly . . .

Hold the Wire Cage so its top ring is positioned around the planetary Drip Cup with the grooves in both nylon Rear Retainers straddling the Ridge on the Drip Cup. Push-in the Front-Center Retainer until it stays in and so that it's grooves also straddle the Ridge on the Drip Cup. The Wire Cage is properly assembled when all three Retainers straddle the Ridge on the Drip Cup in the three opposed locations.

Rotate the Wire Cage out-of-the-way to install or remove the Agitator and Bowl or to add ingredients.

Return the Wire Cage to its front and center position to operate the mixer.

Wire Cage Rotated Left	Latch	Ridge On Drip Cup
		Ridge On Drip Cup

Rear Retainer

Splash Guard

	Front-Center
Centering Ramp	Retainer

Wire Cage Front-Center Position

Centering Pin

Black Release Knob

PL-40071-1

Fig. 5

– 10 –

ML - 104481 specifications

Hobart ML - 104481 is a state-of-the-art commercial cooking appliance designed specifically for the foodservice industry. Renowned for its reliability and efficiency, this cooking solution is equipped with a variety of features that cater to the demands of any fast-paced kitchen environment.

One of the standout characteristics of the Hobart ML - 104481 is its versatility. This machine can perform multiple cooking functions including boiling, steaming, and even frying, making it an ideal choice for a wide range of culinary applications. The ability to switch between different cooking methods means that chefs can optimize their workflows without needing to invest in multiple pieces of equipment.

The Hobart ML - 104481 is equipped with a powerful heating system that ensures quick heat-up times, allowing operators to prepare food dishes rapidly. This feature is particularly advantageous during peak service periods, maximizing efficiency and minimizing wait times for customers. Additionally, the unit’s precise temperature control system enables chefs to achieve consistent results across various cooking tasks, enhancing the quality of the final product.

Constructed with durable, high-quality materials, the Hobart ML - 104481 is designed to withstand the rigors of daily use in a commercial kitchen. Its stainless-steel exterior not only presents a professional appearance but also ensures easy cleaning and maintenance. Hygiene is paramount in food service, and this model facilitates compliance with health and safety standards.

Advanced technologies integrated into the Hobart ML - 104481 include programmable controls that allow operators to set and save specific cooking parameters for different recipes. This feature ensures that meals can be prepared consistently every time, reducing the risk of human error. Moreover, the intuitive control panel is designed for ease of use, allowing staff to quickly navigate through operations, which is essential in a busy kitchen environment.

In summary, Hobart ML - 104481 is a highly efficient and versatile cooking solution tailored for commercial kitchens. With its robust construction, fast heating capabilities, and advanced programmable features, this appliance not only meets but exceeds the expectations of foodservice operators. Whether used in restaurants, catering services, or institutional kitchens, the Hobart ML - 104481 stands out as a reliable partner in delivering high-quality dishes efficiently and consistently.