Hobart ML - 104481 manual 0100

Page 7

PROGRAMMABLE TIMER CONTROLLER (when equipped) continued

Using the Preset Keys, P1 or P2, to set the Mixing Time . . .

Each preset key has four time settings. The indicator above the number 1, 2, 3, or 4 and the P1 or P2 indicator light identify which preset time is being displayed. The chart below shows the default settings; the next page shows how to revise these preset times. The Dial Timer KNOB can be used to adjust the mixing time if the knob is turned prior to pressing START.

-

P1

-01:00

-- - -

P2

1 2 3 4

 

Indicators above P1 and 1 indicate the first preset time contained in P1.

Beginning from the Idle display [ – – : – – ], press P1 or P2 to display the #1 preset mixing time. ( Pressing P1 or P2 again will display the next preset time, etc.)

☛The Dial Timer KNOB can adjust the time. START and STOP buttons control mixing operation.

Press START to begin mixing: The timer will countdown from the set time to [ 00 : 00 ].

If STOP is pressed, both mixing and timer countdown will be interrupted. After pressing STOP . . . Press START to resume both mixing and timer countdown; or, press CLEAR to return to the Idle display.

When the mixer is stopped, you may perform any appropriate task, such as the following: Add ingredients, change speed, reset the timer, continue mixing, or unload.

When the timer reaches [ 00 : 00 ] the mixer stops; a beep tone sounds for two seconds;

and the next preset mixing time displays. When the last preset time reaches [ 00 : 00 ],

the P1 or P2 indicator goes off; and the Idle display [ – – : – – ] returns. Repeat from ☛ to complete four preset times.

The timer reverts to the Factory Programmed Preset Times after any power interruption:

Factory Programmed Preset Times

Preset Key

 

 

Indicator

 

 

 

 

 

 

 

1

2

3

4

 

 

 

 

 

P1

01:00

02:00

10:00

00:00

P2

02:00

01:00

05:00

03:00

 

 

 

 

 

– 7 –

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TI on Model D330 Mixer Location InstallationModel D330 Mixers General UnpackingElectrical Connection Check Rotation Three-Phase Machines OnlyOperation ELECTRO-MECHANICAL Timer Controls when equippedUsing the Dial Timer to set the Mixing Time Programmable Timer Controller when equippedFor Continuous Mixing 0100 Factory Programmed Preset Times Preset Key Indicator 0100 Bowl Lift Changing SpeedsMixing Bowl Guard Fig To rotate the Wire Cage Assembly to the rearTo remove the Wire Cage Assembly for cleaning To reinstall the Wire Cage AssemblyCleaning MaintenanceLubrication Bowl Lift Slideways TroubleshootingService Bowl Lift

ML - 104481 specifications

Hobart ML - 104481 is a state-of-the-art commercial cooking appliance designed specifically for the foodservice industry. Renowned for its reliability and efficiency, this cooking solution is equipped with a variety of features that cater to the demands of any fast-paced kitchen environment.

One of the standout characteristics of the Hobart ML - 104481 is its versatility. This machine can perform multiple cooking functions including boiling, steaming, and even frying, making it an ideal choice for a wide range of culinary applications. The ability to switch between different cooking methods means that chefs can optimize their workflows without needing to invest in multiple pieces of equipment.

The Hobart ML - 104481 is equipped with a powerful heating system that ensures quick heat-up times, allowing operators to prepare food dishes rapidly. This feature is particularly advantageous during peak service periods, maximizing efficiency and minimizing wait times for customers. Additionally, the unit’s precise temperature control system enables chefs to achieve consistent results across various cooking tasks, enhancing the quality of the final product.

Constructed with durable, high-quality materials, the Hobart ML - 104481 is designed to withstand the rigors of daily use in a commercial kitchen. Its stainless-steel exterior not only presents a professional appearance but also ensures easy cleaning and maintenance. Hygiene is paramount in food service, and this model facilitates compliance with health and safety standards.

Advanced technologies integrated into the Hobart ML - 104481 include programmable controls that allow operators to set and save specific cooking parameters for different recipes. This feature ensures that meals can be prepared consistently every time, reducing the risk of human error. Moreover, the intuitive control panel is designed for ease of use, allowing staff to quickly navigate through operations, which is essential in a busy kitchen environment.

In summary, Hobart ML - 104481 is a highly efficient and versatile cooking solution tailored for commercial kitchens. With its robust construction, fast heating capabilities, and advanced programmable features, this appliance not only meets but exceeds the expectations of foodservice operators. Whether used in restaurants, catering services, or institutional kitchens, the Hobart ML - 104481 stands out as a reliable partner in delivering high-quality dishes efficiently and consistently.
Top Page Image Contents