Kenwood FPM270, FPM260 Attachments, To use your food processor, To use your liquidiser, Hints

Page 5

attachments

Not all of the attachments listed below may be included with your food processor. Attachments are dependent upon the model variant.

￿knife blade dough tool

!twin beater geared metal whisk

thick slicing/coarse grating disc

thin slicing/fine grating disc

rasping/parmesan disc (if supplied)

citrus juicer (if supplied)

centrifugal juicer (if supplied)

spatula (if supplied)

recipe book (if supplied)

to use your food processor

1Fit the bowl by aligning the on the bowl with the on the power unit, turn clockwise ￿ until it locks .

2Fit an attachment over the bowl drive shaft.

Note: Detachable drive shaft ￿ should only be fitted when using the discs, citrus juicer or twin beater geared whisk.

Always fit the bowl and attachment onto the processor before adding ingredients.

3Fit the lid ￿ - ensuring the top of the drive shaft/tool locates into the centre of the lid.

Do not use the lid to operate the processor, always use the on/off speed control.

4Plug in, switch on and select a speed. (Refer to the recommended speed chart).

The processor will not operate if the bowl or lid are not fitted correctly into the interlock. Check that the feed tube and bowl handle are situated to the right hand side.

Use the pulse (P) for short bursts. The pulse will operate for as long as the control is held in position.

5Reverse the above procedure to remove the lid, attachments and bowl.

Always switch off and unplug before removing the lid. important

Your processor is not suitable for crushing or grinding coffee beans, or converting granulated sugar to caster sugar.

When adding almond essence or flavouring to mixtures avoid contact with the plastic as this may result in permanent marking.

to use your liquidiser

1Fit the sealing ring ￿ into the blade unit ￿ - ensuring the seal is located correctly in the grooved area.

Leaking will occur if the seal is damaged or

incorrectly fitted.

2Screw the goblet onto the blade assembly ￿. Refer to the graphics on the underside of the blade unit as follows:

- unlocked position

- locked position

The liquidiser will not operate if incorrectly assembled.

3Put your ingredients into the goblet.

4Fit the lid to the goblet and push down to secure ￿. Fit the filler cap.

5Place the liquidiser onto the power unit, align the on the

liquidiser with the on the power unit and turn clockwise ￿ to lock .

The appliance will not operate if the liquidiser is

incorrectly fitted to the interlock.

6Select a speed (refer to the recommended speed chart) or use the pulse control.

safety

Liquids should be allowed to cool to room temperature before blending.

Always take care when handling the blade assembly and avoid touching the cutting edge of the blades when cleaning.

Only operate the liquidiser with the lid in place.

Only use the goblet with the blade assembly supplied.

Never run the liquidiser empty.

To ensure the long life of your liquidiser, do not run it for longer than 60 seconds.

Smoothie recipes - never blend frozen ingredients that have formed a solid mass during freezing, break it up before adding to the goblet.

hints

When making mayonnaise, put all the ingredients, except the oil, into the liquidiser. Remove the filler cap. Then, with the appliance running, add the oil slowly through the hole in the lid.

Thick mixtures, e.g. pâtés and dips, may need scraping down. If the mixture is difficult to process, add more liquid.

Ice crushing - operate the pulse in short bursts until crushed to the desired consistency.

The processing of spices is not recommended as they may damage the plastic parts.

The appliance will not work if the liquidiser is incorrectly fitted.

To blend dry ingredients - cut into pieces, remove the filler cap, then with the appliance running, drop the pieces down one by one. Keep your hand over the opening. For best results empty regularly.

Don’t use the liquidiser as a storage container. Keep it empty before and after use.

Never blend more than 1.2 litres - less for frothy liquids like milkshakes.

3

Image 5
Contents FPM260 series FPM270 series Page Page Key Processor SafetyGlass liquidiser Mini chopper/mill if suppliedTo use your food processor AttachmentsTo use your liquidiser Liquidiser will not operate if incorrectly assembledSafety Recommended speed chartHerbs are best milled when clean and dry To use your mini chopper/mill if suppliedUsing the whisk Using the attachmentsKnife blade Dough toolCentrifugal juicer if supplied Care & cleaningGuarantee UK only Service & customer careYou supply your receipt to show when you bought it Other countriesProblem Cause Solution Troubleshooting guideProcessor will not work If the bowl and lid are fittedCarrot and coriander soup RecipesShortcrust pastry LasagneWhite bread

FPM270, FPM260 specifications

The Kenwood FPM260 and FPM270 are versatile food processors designed to make food preparation efficient and effortless. With their innovative features and user-friendly design, these models stand out in the kitchen appliance market.

One of the key features of both FPM260 and FPM270 is their powerful motor, delivering reliable performance that can handle a variety of tasks. Whether it is chopping vegetables, mixing dough, or preparing purees, these food processors are equipped to tackle a wide range of culinary activities. The 750-watt motor allows for quick and effective processing, which is perfect for busy home cooks looking to save time.

In terms of capacity, the FPM260 comes with a 2.1-liter bowl, while the FPM270 features a slightly larger 3.5-liter bowl. This means that both models can accommodate significant amounts of ingredients, making them suitable for meal prepping or cooking for larger families. The large capacity is especially beneficial when it comes to mixing and kneading dough, as users can work with larger quantities without the need for multiple batches.

The ergonomic design of the FPM260 and FPM270 includes an easy-to-use control panel with variable speed settings. This allows users to customize the processing speed based on the specific task at hand, ensuring optimal consistency and texture in the final product. Additionally, both models come equipped with a variety of attachments, including a metal chopping blade, a kneading blade, and a slicing disc. These attachments enhance the versatility of the processors, enabling users to perform a wide array of culinary functions with ease.

Safety features are also a priority in the design of these food processors. Both the FPM260 and FPM270 include a safety lock mechanism that prevents the machine from operating unless the bowl and lid are securely in place. This ensures that users can operate the appliance safely without the risk of accidents.

Moreover, the compact design and lightweight construction make it easy to store these food processors when not in use, while still providing robustness for everyday cooking tasks. The modern aesthetic of the Kenwood FPM260 and FPM270 also ensures that they will fit seamlessly into any kitchen décor.

In conclusion, the Kenwood FPM260 and FPM270 food processors offer a combination of power, versatility, and safety features. With their generous bowl capacities, efficient motor, and multiple attachments, they are ideal for anyone looking to simplify their food preparation process and enhance their culinary skills in the kitchen.