Detergent Dispenser, Rinse Aid Dispenser

DETERGENT, RINSE AID, OR SANITIZER DISPENSERS — Tubing Installation

All detergent, rinse aid, and / or sanitizer dispensers must have all connections sealed against leakage.

The dishwasher uses 1.42 gallons per rack at a flow rate of 5.67 gallons per minute at 20 psig flowing pressure (equivalent to a maximum head pressure of 46 feet of water). This information is used when setting the detergent, rinse aid, or sanitizer pumps.

REMOVE PLUGS

TO INSTALL –

DETERGENT FEEDER TUBE

Detergent Dispenser

The left side of the dishwasher has two 7/8" diameter plugged holes, one upper hole and one lower hole (Fig. 7). An alternate 7/8" diameter plugged lower hole, is located on the front tank wall (Fig. 7). With the tank empty, remove one upper plug and one lower plug to install the detergent dispenser.

•The upper hole is for installation of the detergent feeder tube.

•One of the lower holes is used for installation of the detergent sensor.

Rinse Aid Dispenser

DETERGENT SENSOR

ALTERNATE

DETERGENT SENSOR

Fig. 7

PL-41512-1

The rinse line flange connector on top of the dishwasher has
two 1/8" NPT pipe plugs (Fig. 8).
two 1/8" NPT pipe plugs (Fig. 8).	REAR PIPE PLUG
• Remove either front or rear plug (Fig. 8) for installation of

the rinse aid dispenser tube unless a chemical sanitizer is
to be installed. If installing a chemical sanitizer, use the
rear hole for the rinse aid dispenser.
Chemical Sanitizer Dispenser

When the dishwasher is to be operated in the chemical sanitizing	FRONT PIPE PLUG

mode, the machine must be converted to low-temperature		Fig. 8
sanitization by an authorized Hobart-trained service technician		Fig. 8
and a chemical sanitizer dispenser that has been tested and
recognized by NSF international must be installed.

PL-41510-1

• Remove the front pipe plug (Fig. 8) for installation

of the chemical sanitizer tube. To assure an

unobstructed flow of sanitizer, locate the

sanitizer tube in the denter of water flow by

drilling the sanitizer tube fitting so that its inside

REAR

FRONT

Sanitizer Tube

diameter is equal to the outside diameter of the

tube. Slide the tube into the flange until it

touches the opposite (rear) side and then pull it

back out 1/2 inch (Fig. 9).

• Rate for 5.25% Sodium hypochlorite (bleach) —

4.5 – 7 ml. with 9 seconds (maximum).

Top of Dishwasher

Slide tube in until it touches, then pull it

out 1/2"

1/2"

Rinse Line Flange Connector

• Rate for 8.4% Sodium hypochlorite (bleach) —

3 – 4 ml. with 9 seconds (maximum).

PL-53581

Fig. 9

– 13 –

ML-110974, AM14TC, AM14T, AM14F, ML-110973 specifications

Hobart ML-110975, ML-110973, AM14F, AM14T, and AM14TC are a series of advanced models designed for commercial food preparation, offering efficiency and longevity in professional kitchens. Each model is tailored to meet diverse culinary needs, making them a valuable addition to any foodservice operation.

Starting with the Hobart ML-110975 and ML-110973, these models are known for their robust build and high performance. The ML-110975 features a powerful motor and a durable construction, enabling it to handle heavy mixing tasks seamlessly. This model is equipped with a 12-quart bowl, making it suitable for a variety of batch sizes. On the other hand, the ML-110973 offers a slightly smaller 7-quart capacity, making it ideal for establishments with lower volume requirements. Both models utilize a unique planetary mixing action that ensures thorough mixing of ingredients, thus enhancing the quality of the final product.

The AM14F and AM14T models take the capabilities of the Hobart lineup even further. The AM14F features a food processor attachment that expands its functionality beyond just mixing, allowing for tasks like chopping and grating, making it an essential tool for chefs looking to maximize efficiency. The AM14T includes additional temperature control features, making it particularly useful in recipes that require precise temperature management for ingredients, such as chocolate or delicate sauces.

Finally, the AM14TC integrates innovative technology into its design. This model comes with a time and temperature control display that provides added precision during the preparation process. The touchscreen interface simplifies operation, allowing chefs to easily program settings based on specific recipes. This not only enhances the consistency of food preparation but also minimizes the potential for human error.

Across this series, all models utilize Hobart's commitment to quality and innovation, combining solid construction, powerful motors, and user-friendly features. With their ability to accommodate a wide range of culinary tasks, from dough mixing to food processing, Hobart's ML-110975, ML-110973, AM14F, AM14T, and AM14TC are indispensable tools for any professional kitchen aiming to improve productivity and efficiency. Their reliable performance and versatility ensure that they can keep pace with the demands of any high-volume foodservice establishment. With Hobart’s reputation for excellence, these models are a worthwhile investment for chefs and foodservice operators alike.

Detergent Dispenser

Rinse Aid Dispenser

Chemical Sanitizer Dispenser

4.5 – 7 ml. with 9 seconds (maximum).

ML-110974, AM14TC, AM14T, AM14F, ML-110973 specifications