Symptom, Service | Hobart AM14F, ML-110975, ML-110973, AM14TC

SYMPTOM

Inadequate rinse or rinse water temperature is too low.

POSSIBLE CAUSE

1.Dirty line strainer causing reduced water flow. Turn off water supply, remove strainer cap, withdraw and clean screen. Reassemble.

2.Low supply line pressure.

3.Excessive mineral deposits throughout wash and rinse system. Deliming may be necessary.

4.Incoming water temperature to booster (if applicable) below 110°F. Extend wash cycle from 40 to 60 seconds.

Leaking valve (except solenoid	1.	Foreign material preventing proper valve operation. NOTE: A critical
type).		period is soon after installation when pipe compound or metal shavings
		may lodge at the valve seat. Shut off supply line. Unscrew and lift
		bonnet from valve body. Clean valve and reassemble.
	2.	If a solenoid valve is malfunctioning, (not opening or not closing) it is
		recommended that you contact Service.

No wash tank heat.	1.	The machine is equipped with a low water safety device which shuts off
		heat if the water level drops. Check for proper water level. If the water
		level is too low, the overflow tube might be out of position. Or, something
		may be inhibiting free movement of low water float; remove any foreign
		object from around low water float magnet.
	2.	Circuit breaker to machine tripped.
	3.	Gas line closed.
		If a failure occurs due to the gas heat control board or gas pressure, the
		reset button, located on the side of the gas burner control box, will pop
		out. This completely shuts off the gas heat system. To reset the system,
		push the button in. If the system does not reset, contact Service.

No or slow fill.	1.	Water supply may be off; make sure water supply valve is open.
	2.	Dirty line strainer causing reduced water flow. Turn off water supply,
		remove strainer cap, withdraw and clean screen. Reassemble.

Dribbling water from lower	1.	If equipped with electric booster, normal dripping from the lower rinse
rinse arm.		arm will occur during water heating due to expansion of the water. This
		will occur once between machine cycles.
	2.	If water dribbles or leaks continuously from rinse arms on any machine,
		refer to Leaking Valve, above.

SERVICE

Contact your local Hobart-authorized service office for any repairs or adjustments needed on this equipment. If a gas orifice fitting is to be adjusted or replaced, have it serviced by qualified Hobart- authorized service personnel. Long-term service contracts are available on this and other Hobart products.

FORM 34555 (Dec. 2000)

– 20 –

PRINTED IN U.S.A.

ML-110974, AM14TC, AM14T, AM14F, ML-110973 specifications

Hobart ML-110975, ML-110973, AM14F, AM14T, and AM14TC are a series of advanced models designed for commercial food preparation, offering efficiency and longevity in professional kitchens. Each model is tailored to meet diverse culinary needs, making them a valuable addition to any foodservice operation.

Starting with the Hobart ML-110975 and ML-110973, these models are known for their robust build and high performance. The ML-110975 features a powerful motor and a durable construction, enabling it to handle heavy mixing tasks seamlessly. This model is equipped with a 12-quart bowl, making it suitable for a variety of batch sizes. On the other hand, the ML-110973 offers a slightly smaller 7-quart capacity, making it ideal for establishments with lower volume requirements. Both models utilize a unique planetary mixing action that ensures thorough mixing of ingredients, thus enhancing the quality of the final product.

The AM14F and AM14T models take the capabilities of the Hobart lineup even further. The AM14F features a food processor attachment that expands its functionality beyond just mixing, allowing for tasks like chopping and grating, making it an essential tool for chefs looking to maximize efficiency. The AM14T includes additional temperature control features, making it particularly useful in recipes that require precise temperature management for ingredients, such as chocolate or delicate sauces.

Finally, the AM14TC integrates innovative technology into its design. This model comes with a time and temperature control display that provides added precision during the preparation process. The touchscreen interface simplifies operation, allowing chefs to easily program settings based on specific recipes. This not only enhances the consistency of food preparation but also minimizes the potential for human error.

Across this series, all models utilize Hobart's commitment to quality and innovation, combining solid construction, powerful motors, and user-friendly features. With their ability to accommodate a wide range of culinary tasks, from dough mixing to food processing, Hobart's ML-110975, ML-110973, AM14F, AM14T, and AM14TC are indispensable tools for any professional kitchen aiming to improve productivity and efficiency. Their reliable performance and versatility ensure that they can keep pace with the demands of any high-volume foodservice establishment. With Hobart’s reputation for excellence, these models are a worthwhile investment for chefs and foodservice operators alike.