Plumbing Connections, Drain, Water Supply

PLUMBING CONNECTIONS

WARNING: PLUMBING CONNECTIONS MUST COMPLY WITH APPLICABLE SANITARY, SAFETY, AND PLUMBING CODES.

Drain

A drain hose is provided with a 3/4" pipe connection adapter. This should be securely plumbed into the sink drain. Use care not to kink hose. See installation diagrams in this manual. Drain must have a minimum flow capacity of 10 gallons per minute.

Water Supply

A water hammer arrestor (meeting ASSE-1010 Standard or equivalent) should be installed (supplied by others) in the common water supply line at the service connection.

Water must be proper hardness. Recommended hardness range is 4 – 6 grains per gallon. Lower hardness can promote corrosion, higher hardness may cause excessive formation of lime scale.

The plumber who connects this machine is responsible for making certain that water lines are THOROUGHLY FLUSHED OUT BEFORE connecting to the dishwasher. This "flush-out" is necessary to remove all foreign matter, such as chips (resulting from cutting or threading of pipes), pipe joint compound from the lines, or, if soldered fittings are used, bits of solder or cuttings from the tubing. Debris, if not removed, may lodge in the dishwasher's plumbing components and render them inoperative. Manual valves or solenoid valves fouled by foreign matter, and any expenses resulting from this fouling, are NOT the responsibility of the manufacturer.

Water supply requirements are as follows:

MODEL	TEMPERATURE	FLOWING PRESSURE
LX18, LX30	180°F Minimum	15 to 25 psig
LX18H, LX30H, LX40H	140°F Minimum	15 to 25 psig
LX18C, LX30C, LX40C	140°F Minimum	15 to 25 psig
LX30C w/booster	100°F Minimum	15 to 25 psig

If flowing pressure exceeds 25 psig, a pressure reducing valve (not supplied) must be installed in the supply line. CAUTION: The water pressure regulator must have a relief by-pass. Failure to use the proper type of pressure regulator may result in damage to the unit. If flowing pressure is less than 15 psig, improper machine operation may result.

A manual shutoff valve (not supplied) should be installed upstream of the fill hose to accommodate servicing the machine.

It is recommended that a line strainer (not supplied) be installed in the supply line between the manual shutoff valve (not supplied) and the connection point on the machine. Make plumbing connections with 1/2" minimum copper piping OD (3/4" recommended), with a 3/4" male garden hose fitting (not supplied). See installation diagrams, pages 9-11.

NOTE: Iron in the water supply can cause staining. An iron filter is recommended for iron concentration greater than 0.1 part per million. High chloride levels in the water supply can cause pitting. A chloride removal system is required if levels exceed 50 parts per million.

– 5 –

LX18, LX30C, LX30H, LX40C, LX30 specifications

The Hobart LX series of dishwashers, including models LX18H, LX18C, LX30, LX40C, and LX30H, offers a combination of efficiency, advanced technology, and robust design suitable for various commercial kitchen environments. These machines are engineered to handle differing volumes of dishwashing tasks while maintaining high standards of cleanliness and sanitation.

The LX18H and LX18C are designed for lower-volume operations, making them ideal for smaller establishments such as cafes and bistros. The LX18H model features a high-temperature wash, ensuring effective sanitization through elevated water temperatures. It includes an energy-efficient operation with a low water consumption rate, making it both eco-friendly and cost-effective. The LX18C, on the other hand, utilizes chemical sanitizing, allowing for flexibility in cleaning procedures. Both models have quick cycle times, facilitating high productivity during peak hours.

Moving up in capacity, the LX30 and LX30H models cater to medium-volume commercial kitchens. The LX30 offers a high-efficiency wash system that allows for thorough cleaning in less time, benefiting fast-paced environments. The integrated booster heater ensures the water reaches optimal temperatures for sanitization, while a user-friendly control panel simplifies operation. The LX30H variant also focuses on high-temperature sanitization, making it suitable for establishments that require stringent hygiene standards.

The LX40C model stands out within the series as a versatile option for high-capacity dishwashing needs. It combines advanced technology with superior construction, allowing it to manage heavy workloads without compromising speed or efficacy. The wash, rinse, and drainage cycles are optimized to minimize water usage while maximizing cleaning power. Its chemical sanitization option provides consistent results, suitable for large commercial kitchens where the demand for cleanliness is paramount.

Enhancing user experience across the LX series is the inclusion of features such as automatic door opening, which allows for convenience and ease of use. Additionally, built-in diagnostics help in maintaining the machine's performance, reducing downtime. The robust stainless-steel construction ensures durability, while a compact design allows for versatility in placement within the kitchen.

In summary, the Hobart LX series—comprising LX18H, LX18C, LX30, LX40C, and LX30H—offers customizable solutions for a variety of dishwashing needs. With their energy-efficient features, advanced sanitization technologies, and user-centric designs, these models exemplify Hobart's commitment to delivering high-quality, reliable dishwashing solutions for the demanding environment of commercial kitchens.