Hobart LX18H, LX18C, LX30 Recommended, Function Programmable Variables, Preparation ALL Models

Page 20

PROGRAMMABLE VARIABLES AND RECOMMENDED SETTINGS — MODELS LX40H & LX40C

The following functions of the dishwasher are programmable. The chart below shows the variables that may be programmed for each function and the recommended setting for each.

 

 

 

RECOMMENDED

FUNCTION

PROGRAMMABLE VARIABLES

SETTING

Wash Setpoint

H Models:

160°F - 170°F

165°F

 

C Models:

130°F - 150°F

130°F

Booster Setpoint

180°F - 199°F

190°F

Temperature Display Mode

°F; °C

 

°F

Sanitizer Duty Cycle (LX40C Only)

OFF; 1 - 10 (In steps of 1) (10-100%)

40%

Detergent On Time

OFF; 1 - 30 Seconds (In steps of 1)

7 Seconds

Rinse Agent Duty Cycle

OFF; 1 - 10 (In steps of 1) (10-100%)

70%

Idle Shutdown Time

1 - 6 Hours (In steps of 1)

4 Hours

Cycle Selection (Lock/Unlock)

Lock; Unlock

Unlock

Default Cycle

Light; Normal; Heavy

Light

Delime Counter Preset

*OFF; 500 - 3000 Cycles (In steps of 25)

***1500 Cycles

Detergent Prime Time

**25 - 75 Seconds (In steps of 1)

35 Seconds

Rinse Agent Prime Time

**25 - 75 Seconds (In steps of 1)

35 Seconds

Sanitizer Prime Time

**25 - 75 Seconds (In steps of 1)

35 Seconds

Heavy Wash Time

100 - 200 Seconds (In steps of 1)

156 Seconds

Heavy Rinse Time

Normal = 10 Sec.; Exten. = 20 Sec.

Normal

*Disabled if OFF is programmed. Factory Setting is 1500 Cycles.

**Not available if pump is turned OFF.

***Determined by water condition.

PREPARATION — ALL MODELS

Make sure the coarse (Fig. 5) and fine (Fig. 6) strainers are in place and free of debris. Check both wash arms (all models) and rinse arms (models LX30, LX30H, LX30C, LX40H & LX40C only) to make sure they spin freely and are not clogged.

Coarse Strainer

Model LX30

Fig. 5

PL-40091-1

Fine Strainer

Model LX30

Fig. 6

PL-40092-1

– 20 –

Image 20
Contents UCT I O Table of Contents LX Series Dishwashers General Model DescriptionInstallation UnpackingLocation LevelingWater Supply Plumbing ConnectionsDrain Electrical Connection Electrical Data LX40HCover Plate Detergent and Rinse AID Chemical Sanitizer Models LX18C, LX30C, and LX40C OnlyInstallation Diagram LX18, LX18C & LX18H Installation Diagram LX30, LX30C & LX30H Installation Diagram LX40C & LX40H Controls Models LX18, LX18C, LX18H, LX30, LX30C & LX30H Fig OperationBefore First USE Do this Display Shows Remarks Diagnostic Messages Models LX18, LX18C & LX18HModified Fill and Dump Modified Fill and Dump WASH/RINSE Cycle TimesModels LX30, LX30C and LX30H WASH/RINSE Cycle TimesControls Models LX40H & LX40C Fig Operating Models LX40H & LX40CReady Mode ReadyModels LX40H & LX40C WASH/RINSE Cycle Times Cycle Wash Drain Dwell RinseOperator Programming Priming Chemical PumpsManager Programming Machine Must Be In Ready Mode Parameter Display ShowsPreparation ALL Models RecommendedFunction Programmable Variables DOs and DON’Ts for Your NEW Hobart Warewasher Cleaning ALL Models Deliming Models LX18, LX18C & LX18H MaintenanceDeliming General Deliming Models LX30, LX30C & LX30H Deliming Models LX40H and LX40C LubricationTroubleshooting Symptom Possible CausesDR1 PRBLM, FILL1 Service

LX18, LX30C, LX30H, LX40C, LX30 specifications

The Hobart LX series of dishwashers, including models LX18H, LX18C, LX30, LX40C, and LX30H, offers a combination of efficiency, advanced technology, and robust design suitable for various commercial kitchen environments. These machines are engineered to handle differing volumes of dishwashing tasks while maintaining high standards of cleanliness and sanitation.

The LX18H and LX18C are designed for lower-volume operations, making them ideal for smaller establishments such as cafes and bistros. The LX18H model features a high-temperature wash, ensuring effective sanitization through elevated water temperatures. It includes an energy-efficient operation with a low water consumption rate, making it both eco-friendly and cost-effective. The LX18C, on the other hand, utilizes chemical sanitizing, allowing for flexibility in cleaning procedures. Both models have quick cycle times, facilitating high productivity during peak hours.

Moving up in capacity, the LX30 and LX30H models cater to medium-volume commercial kitchens. The LX30 offers a high-efficiency wash system that allows for thorough cleaning in less time, benefiting fast-paced environments. The integrated booster heater ensures the water reaches optimal temperatures for sanitization, while a user-friendly control panel simplifies operation. The LX30H variant also focuses on high-temperature sanitization, making it suitable for establishments that require stringent hygiene standards.

The LX40C model stands out within the series as a versatile option for high-capacity dishwashing needs. It combines advanced technology with superior construction, allowing it to manage heavy workloads without compromising speed or efficacy. The wash, rinse, and drainage cycles are optimized to minimize water usage while maximizing cleaning power. Its chemical sanitization option provides consistent results, suitable for large commercial kitchens where the demand for cleanliness is paramount.

Enhancing user experience across the LX series is the inclusion of features such as automatic door opening, which allows for convenience and ease of use. Additionally, built-in diagnostics help in maintaining the machine's performance, reducing downtime. The robust stainless-steel construction ensures durability, while a compact design allows for versatility in placement within the kitchen.

In summary, the Hobart LX series—comprising LX18H, LX18C, LX30, LX40C, and LX30H—offers customizable solutions for a variety of dishwashing needs. With their energy-efficient features, advanced sanitization technologies, and user-centric designs, these models exemplify Hobart's commitment to delivering high-quality, reliable dishwashing solutions for the demanding environment of commercial kitchens.