701 S Ridge Avenue, Troy, OH 45374
CLCS86eR 
DISHWASHER
OTHER STANDARD FEATURES . . .
•Thermal Layer Curtains help keep the heat inside the machine.
•Ball Detent Clutch Conveyor Drive for maximum protection against conveyor jams
•Integrated Removable Pump Intake Screen to offer the ultimate guard of keeping debris from
entering the pump.
•Hinged Door Seals and stainless steel labyrinth seal for
•Door Actuated Drain Closure. Closing the door automatically actuates drain closure, eliminates extra manual steps, ensures that closure is in the correct position.
AVAILABLE OPTIONS AND ACCESSORIES . . .
Flexibility is synonymous with Hobart CLeR dish washers. If your operation demands a dishwasher with a vent hood, an extended hood . . . a power scrapper, just specify the combination of options that suit your needs.
DDU38e Direct Drive Unloader. Center pawl to be
connected to dishwasher conveyor by means of a stainless steel adjustable rod. As conveyor drives,
center pawl drives racks around 90 degree corner. The DDU38e is designed to move the racks at the same speed as the conveyor dishwasher speed.
The DDU38e adds 38" to the length of the machine.
OTHER AVAILABLE ACCESSORIES . . .
|
|
| CLCS86eR |
|
|
| |
Machine Ratings (Mechanical) |
| ||
Racks per hour (193⁄4" x 193⁄4") | 342 | ||
Conveyor Speed - feet per minute | 9.5 max. | ||
|
|
| |
Dishes per Hour (Average 25 per rack) | 8,550 | ||
|
|
| |
Glasses per Hour (Average 45 per rack) | 15,390 | ||
|
|
| |
Floor Space – Table to Table (Inches) | 86 | ||
|
|
| |
Overall Dimensions – H x W x D (Inches) | 799⁄16 x 993⁄4 x 311⁄4 | ||
Motor H.P. | Power Scrapper 2 | ||
|
|
| Wash 2 – Rinse 2 |
|
|
| |
Conveyor Drive H.P. | 1⁄6 | ||
Number of Tanks | 3 | ||
|
|
| |
Tank Capacity – Gallons | Power Scrapper 23 | ||
|
|
| Wash 23 – Rinse 22 |
|
|
| |
Pump Capacity – |
| ||
| Gallons per Minute - Weir Test | Combined 435 | |
|
|
| |
Heating Equipment – |
| ||
(For keeping wash/power rinse hot) | 156,000 BTU per hr. | ||
Gas Burners (with Natural Gas/LP) | (2 - 78,000) | ||
|
|
| |
Electric Heating Unit – Size Used | Regulated 25 KW | ||
|
|
| |
Booster Heater / Final Rinse | 30 KW | ||
|
|
| |
Rinse – Minutes operated during hour of |
| ||
| maximum operation | 60 | |
|
|
| |
Final Rinse Flow – Gals. per min. |
| ||
At 15 PSI Flow Pressure | 1.89 | ||
|
|
| |
At 20 PSI Flow Pressure | 2.2 | ||
|
|
| |
Final Rinse Flow – Gals. per hr. – MAXIMUM |
| ||
At 15 PSI Flow Pressure | 114 | ||
|
|
| |
At 20 PSI Flow Pressure | 132 | ||
|
|
| |
Rinse 20 PSI Flow Pressure | Hot Water Sanitizing | ||
| Gal./Rack | .39 - 180°F | |
|
|
| |
Steam Consumption – |
| ||
Pounds per hr. - MAXIMUM |
| ||
| Approx. 30 lbs. per hr. = 1 boiler H.P. (BHP) |
| |
Dishwasher, based on 20 PSI steam and |
| ||
on customer supplying final rinse water |
| ||
| at 180°F maximum | 130 | |
|
|
| |
Steam Booster, if used on 20 PSI steam - |
| ||
20 PSI water flowing - 130°F entering |
| ||
water raised to 180°F min. | 63 | ||
|
|
| |
Exhaust Requirements – |
| ||
Cubic Feet per minute |
| ||
|
| Entrance End | 200 |
|
|
|
|
|
| Discharge End | 175 |
|
|
| |
Peak Rate of Drain Flow – Gallons per minute. |
| ||
(Initial rate with full tank) | 38 | ||
|
|
| |
Shipping Weight Crated – Approximate lbs. | 1127 | ||
|
|
|
|
Dishwasher | Page 3 of 12 |